[2024] 300-425 PDF Questions - Perfect Prospect To Go With Prep4pass Practice Exam
Cisco 300-425 Pdf Questions - Outstanding Practice To your Exam
Cisco ENWLSD 300-425 Practice Test Questions, Cisco ENWLSD 300-425 Exam Practice Test Questions
Passing the Cisco 300-425 exam together with one more test, namely Cisco 350-401, is the only requirement for the CCNP Enterprise certificate. Those IT specialists who pick this professional-level certification track are trained to troubleshoot, install, and maintain both local area networks (LAN) and wide area networks (WAN) for systems somewhere within the range of between 100 and 500 hubs.
NEW QUESTION # 110
An engineer must create data-link redundancy for the company's Cisco Wireless LAN Controller. The engineer has decided to configure LAG-based redundancy instead of port-based redundancy. Which three features of LAG-based redundancy influenced this decision? (Choose three.)
- A. The same port has multiple untagged dynamics interfaces.
- B. All interface traffic passes as long as one port is up.
- C. Ports are grouped into multiple LAGs.
- D. Packets are always sent out on the same port they are received on.
- E. Interface connection to two separate nonstacked switches is available.
- F. Full bandwidth of all links is available.
Answer: B,C,D
NEW QUESTION # 111
A company has 10 access point licenses available on their backup Cisco WLC and their primary Cisco WLC is at full capacity, 5 access points are set to high failover priority and 7 access points are set to critical failover priority. During a failure, not all critical access points failed over to the backup Cisco WLC. Which configuration is the cause of this issue?
- A. The high priority access point is oversubscribed.
- B. network ap-priority is set to enable.
- C. The critical priority access point count is oversubscribed.
- D. network ap-priority is set to disable.
Answer: A
Explanation:
https://www.ciscolive.com/c/dam/r/ciscolive/emea/docs/2016/pdf/BRKCOL-2275.pdf
NEW QUESTION # 112
A company has 10 access point licenses available on their backup Cisco WLC and their primary Cisco WLC is at full capacity, 5 access points are set to high failover priority and 7 access points are set to critical failover priority. During a failure, not all critical access points failed over to the backup Cisco WLC. Which configuration is the cause of this issue?
- A. network ap-priority is set to enable.
- B. network ap-priority is set to disable.
- C. The high priority access point is oversubscribed.
- D. The critical priority access point count is oversubscribed.
Answer: D
Explanation:
The issue described indicates that there are more critical priority access points than the backup Cisco WLC can handle with its available licenses. Since there are only 10 licenses available and 7 access points are set to critical priority, not all of them can failover when the primary Cisco WLC is at full capacity. This oversubscription of critical priority access points prevents all of them from failing over as expected.
References: CCNP Enterprise Wireless Design ENWLSD 300-425 and Implementation ENWLSI 300-430 Official Cert Guide
NEW QUESTION # 113
A university is in the process of designing a wireless network in an auditorium that seats 500 students and supports student laptops.
Which design methodology should the university implement in the auditorium?
- A. roaming design model
- B. voice design model
- C. location design model
- D. high-density design model
Answer: D
Explanation:
https://www.cisco.com/c/dam/en_us/solutions/industries/docs/education/cisco_wlan_design_guid e.pdf
NEW QUESTION # 114
A wireless engineer is performing a post verification of a wireless network.
Which two metrics does the engineer verify to ensure that the wireless network can support voice services? (Choose two.)
- A. The client device must have at least an -65 dBm RSSI.
- B. The coverage area must have a noise floor that does not exceed -87 dBm.
- C. The rate of retransmitted packets must be 20 percent or below.
- D. The rate of retransmitted packets must be 15 percent or below.
- E. The client device must have at least an -67 dBm RSSI.
Answer: C,E
Explanation:
NEW QUESTION # 115
A customer has a central Cisco WLC that manages APs in FlexConnect mode. The wireless infrastructure supports multiple small branches. One branch deploys new CCX wireless phones that are authenticated by a central Cisco ISE via PEAP/IMSCHAPv2, and trac is switched locally. The customer must reduce the number of full authentication requests and optimize roaming for the new phones. Which action accomplishes the requirement?
- A. Enable CCKM on the voice SSID and add APs to an AP group.
- B. Enable Aironet IE on the voice SSID and add APs to an AP group.
- C. Enable Aironet IE on the voice SSID and add APs to a FlexConnect group.
- D. Enable CCKM on the voice SSID and add APs to a FlexConnect group.
Answer: D
Explanation:
To reduce full authentication requests and optimize roaming, enabling Cisco Centralized Key Management (CCKM) on the voice SSID is effective. CCKM allows for fast re-authentication during roaming, which is beneficial for voice applications. Adding APs to a FlexConnect group helps manage APs in remote branches more efficiently.
NEW QUESTION # 116
A wireless engineer is hired to design a network for a technology company. The company campus has four buildings and a warehouse with access points that provide full wireless coverage as well as a pair of WLCs located in the core of the network. Which type of wireless architecture is being used?
- A. unified deployment
- B. autonomous deployment
- C. centralized deployment
- D. distributed deployment
Answer: C
Explanation:
NEW QUESTION # 117
Which statement about creating a mobility group is true, excluding mobility anchors?
- A. If WLCs with HA SSO are deployed, each WLC in the WLC HA pair considered separately as a mobility peer.
- B. A mobility groups does not require all WLCs in the group to use the same virtual IP address.
- C. Each WLC must use the same mobility name and be defined as a peer in each other's static mobility members list.
- D. The WLCs do not have to be of the same model or type to be a member of a mobility group, however each member should be running different software versions.
Answer: C
Explanation:
NEW QUESTION # 118
A customer has restricted the AP and antenna combinations for a design to be limited to one model integrated antenna AP for carpeted spaces and one model external antenna AP with high gam antennas tor industrial, maintenance, or storage areas. When moving between a carpeted area to an industrial area, the engineer forgets to change survey devices and surveys several Aps.
Which strategy will reduce the negative impact of the design?
- A. increase the Tx power on incorrectly surveyed access points
- B. Deploy unsurveyed access points to the design
- C. Resurvey and adjust the design
- D. Deploy the specified access points per area type
Answer: C
NEW QUESTION # 119
Which CLI command does an engineer use to validate that the redundancy peer of a Stateful Switchover pair of controllers is up and connected?
- A. rping
- B. mping
- C. eping
- D. ping
Answer: D
Explanation:
NEW QUESTION # 120
A wireless engineer is designing a wireless network to support real-time applications over wireless.
Which IEEE protocol mus the engineer enable on the WLC so that the number of packets that are exchanged between an access point and client are reduced and fast roaming occurs?
- A. 802.11r
- B. 802.11w
- C. 802.11i
- D. 802.11k
Answer: A
Explanation:
NEW QUESTION # 121
What causes the most signal attenuation, based on the wireless design tools?
- A. glass wall
- B. office window
- C. metal door
- D. cinder block wall
Answer: C
Explanation:
NEW QUESTION # 122
A wireless deployment in a high-density environment is being used by vendors to process credit card payment transactions via handheld mobile scanners. The scanners are having problems roaming between access points in the environment. Which feature on the wireless controller should have been incorporated in the design?
- A. 802.11w
- B. AP Heartbeat Timeout
- C. RX SOP
- D. Application Visibility Control
Answer: A
Explanation:
For handheld mobile scanners processing credit card payments, security and seamless roaming are critical. The
802.11w standard, also known as Protected Management Frames (PMF), provides enhanced security that helps prevent disconnections and issues when roaming between access points. Incorporating 802.11w in the design ensures that the scanners maintain a secure and consistent connection while moving throughout the environment. References: CCNP Enterprise Wireless Design ENWLSD 300-425 and Implementation ENWLSI 300-430 Official Cert Guide Premium Edition and Practice
NEW QUESTION # 123
An engineer must ensure that the new wireless LAN deployment can support seamless roaming between access points using a standard based on an amendment to the 802.11 protocol. Which protocol must the engineer selects?
- A. 802.11r
- B. 802.11i
- C. 802.11ac
- D. 802.11e
Answer: A
Explanation:
For seamless roaming between access points, the protocol that supports fast transitions is 802.11r. This amendment to the 802.11 standard allows devices to roam quickly by establishing security credentials before moving to the next access point, reducing the time required for reauthentication.
NEW QUESTION # 124
Which statement about the 9800 Series Wireless Controller mobility tunnel on a Cisco Catalyst 9800 controller is true?
- A. It is a CAPWAP tunnel with control path and data path.
- B. It is a CAPWAP tunnel with data path only.
- C. It is an IPsec tunnel with control path only.
- D. It is an IPsec tunnel with control path and data path.
Answer: A
Explanation:
NEW QUESTION # 125
......
Conclusion
The Cisco 300-425 exam intends for you to master practical issues around wireless networks, and specifically those associated with the enterprise. Training and guidebooks are present to build your potential in this key sphere. So, anyone looking around for a beefing up of their skills in the sector should see to them that he or she takes and passes the actual test with ease.
Online Questions - Outstanding Practice To your 300-425 Exam: https://www.prep4pass.com/300-425_exam-braindumps.html
Practice To 300-425 - Prep4pass Remarkable Practice On your Designing Cisco Enterprise Wireless Networks Exam: https://drive.google.com/open?id=1DHtWGpsmLz0vAoToecnoNaTNpQkT3Yoh
