[Dec-2023] Salesforce OmniStudio-Developer Dumps – Reduce Your Chance of Failure in OmniStudio-Developer Exam
To help you achieve your ultimate goal, we suggest the actual Salesforce OmniStudio-Developer dumps for your Salesforce Certified OmniStudio Developer exam preparation to use as your guideline.
NEW QUESTION # 49
A developer is creating a FlexCard for a new Community page. The FlexCard will display case information along with action to close the case and update the case. And it will be styled using the Community's theme.
What must be developer do to configure the FlexCard for deployment in a Community?
- A. Set the Target property in publish Options to Communitypage''
- B. Set the Developer property in Card Configuration to ''Community''
- C. Configure the Component visibility in the custom Component.
- D. Add the FlexCard's API name to FlexCard Player component
Answer: A
NEW QUESTION # 50
A developer needs to display the following information together on oneFlexCard:
* Account name, address, phone number, website
* Primary contact first name, contact name, address, phone number, email The account information must always be visible, and the contact information should only be visible as needed by the user.
What approach should the developer use to display the contact information on the card?
- A. Set the collapsible property on the block element
- B. Use a conditional FlexCard State
- C. Set the class'' collapsible'' on the block element
- D. Use aData tableelement
Answer: A
Explanation:
Explanation
Setting the collapsible property on the block element allows the user to expand or collapse the block as needed. Using a Data table element is not suitable for displaying contact information. Setting the class'' collapsible'' on the block element has no effect. Using a conditional FlexCard State requires a condition to be met, not a user choice.
NEW QUESTION # 51
Refer to the exhibit.
A developer creates an OmniScript display FirstName, LastName, and BirthDate of a contact using a Type Ahead Block. The DataRaptor used in the Type Ahead has been tested and fetches the correct data.
When previewing Omniscript, the developer enters a name in the Type Ahead and makes a selection of a contact from the list. However, the text fields FirstName. LastName, and BirthDate are not getting populated with the data.
What is the reason that the fields fail to display the fetched data?
- A. FirstName, LastName, and BirthDate are not placed inside the Type ahead Block.
- B. The Typeghead ley is not in the correct format
- C. Use Data JSON is not selected in the properties of the Type Ahead Block.
- D. Lookup Mode is not selected in the properties of the Type A Head Block.
Answer: A
NEW QUESTION # 52
Refer to the exhibit below. What JSON from the DRGetContactDeteils action would display all six values correctlyshown? BlkCases is a Repeat Block, and the names of the elements are the same as the label names without spaces.
- A.
- B.
- C.
- D.
Answer: D
Explanation:
Explanation
According to the OmniScript Data JSON page, the OmniScript structure JSON defines the data elements and their properties that are used in an OmniScript. The exhibit shows an OmniScript structure JSON with six elements: ContactName, ContactPhone, ContactEmail, CaseNumber, CaseSubject, and CaseStatus. The DRGetContactDetails action is a DataRaptor Extract action that retrieves data from the Contact and Case objects in Salesforce. The BlkCases element is a Repeat Block that displays a list of cases related to the contact. Therefore, the JSON from the DRGetContactDetails action that would display all six values correctly shown is option A, which has the following structure:
The other options have different structures that do not match the OmniScript structure shown.
NEW QUESTION # 53
Which two of these options can retrieve data from a Salesforce object? Choose 2 answers
- A. A DataRaptor Load Action
- B. An HTTP Action
- C. A Lookup Action
- D. A DataRaptor Transform Action
- E. A DataRaptor Post Action
- F. A DataRaptor Extract Action
Answer: C,D
NEW QUESTION # 54
In a calculation procedure, what is required for the output of a calculation step to be used in an aggregation step?
- A. It must be included in constants.
- B. It must be a calculation step.
- C. It must be included in the calculation output.
- D. It must be a matrix lookup step.
Answer: C
NEW QUESTION # 55
A developer needs to build a DataRaptor Transform to send current weather to both an OmniScript Card Layout. Which of these samples would be valid for the Expected Output JSON?
A)
B)
C)
D)
- A. Option D
- B. Option C
- C. Option B
- D. Option A
Answer: A
NEW QUESTION # 56
You configured a FlexCard with a DataRaptor data source which uses the params.id as an input. When you click View Data on the FlexCard, valid data displays. However, when you preview the layout, the FlexCard does not display.
What could cause this error? Choose 2 answers
- A. The Data Node field for the FlexCard is empty.
- B. The Attributes haven't been configured to pass the data to the fields.
- C. The Recordid in the Test Data Source Settings is for the wrong record type.
- D. There is no Salesforce record for the FlexCard based on the Recordid in the layout's Test Data Source Settings.
Answer: C,D
NEW QUESTION # 57
A developer builds a new OmniScript. It contains aSet Values element with a ContextId key/value pair that was used during testing.
What should the developer do before moving the OmniScript to a production org?
- A. Delete or Deactivate the Set Values element.
- B. Add a Show/Hide condition on the Set Values element.
- C. Update the ContextId value to specify an id from the Production org.
- D. Deactivate the contextId key/value pair
Answer: A
Explanation:
Explanation
The Set Values element with a ContextId key/value pair was used for testing purposes and is not needed for production. The developer should delete or deactivate the Set Values element before moving the OmniScript to a production org.
NEW QUESTION # 58
Refer to the exhibit.
What JSON from the DRGetAccountDetails action would display all six values correctly in the OmniScript structure shown? BlkContacts is a Repeat Block.
A)
B)
C)
D)
- A. Option D
- B. Option B
- C. Option C
- D. Option A
Answer: C
NEW QUESTION # 59
Refer to the exhibit.
The card layout uses an integration Procedure as a data source. The cards use the layout data source.
Which JSON data structure supports this card layout and follows best practices?
A)
B)
C)
- A. Option B
- B. Option C
- C. Option A
Answer: B
NEW QUESTION # 60
Refer to the exhibit.
A developer creates an OmniScript display FirstName, LastName, and BirthDate of a contact using a Type Ahead Block. The DataRaptor used in the Type Ahead has been tested and fetches the correct data.
When previewing Omniscript, the developer enters a name in the Type Ahead and makes a selection of a contact from the list. However, the text fields FirstName. LastName, and BirthDate are not getting populated with the data.
What is the reason that the fields fail to display the fetched data?
- A. FirstName, LastName, and BirthDate are not placed inside the Type ahead Block.
- B. The Typeghead ley is not in the correct format
- C. Use Data JSON is not selected in the properties of the Type Ahead Block.
- D. Lookup Mode is not selected in the properties of the Type A Head Block.
Answer: A
NEW QUESTION # 61
A developer is configuring an integration Procedure Action in an OmniScript. The Omniscript needs a JSON response from the Integration Procedure but does not need to wait for the response for the user to proceed.
Which feature should the developer enable?
- A. Use Future
- B. Invoke Mode Non-Blocking
- C. Toast Completion
- D. Invoke Mode Fire and Forget
Answer: D
Explanation:
Explanation
The Invoke Mode Fire and Forget feature enables the OmniScript to invoke the Integration Procedure without waiting for a response. This is useful when the response is not needed for the user to proceed
NEW QUESTION # 62
A developer needs to limit the of a DataRaptor Extract to a maximum of one result.
How should the developer configure this?
- A. Set the Limit Property on the Action that calls the DataRaptor Extract.
- B. Use a Custom Output Type when creating the DataRaptor
- C. Define a formula with the Filter function
- D. Use the LIMIT filter on the Extract definition
Answer: D
NEW QUESTION # 63
What is the reason for this? Refer to the exhibit below.
- A. The flag passData.JSON in the parent OmniScript in not configured correctly.
- B. The WLC PubSub Messge flag in the Set Values action of the parent OmniScript has not been set.
- C. Both parent and embeddedOmniScripts have the same element name for the Set Values element.
- D. A developer failed to include a Navigate Action Element to pass data from the parent OmniScript.
Answer: D
NEW QUESTION # 64
What two advantages does a DataRaptor Turbo Extract have over a standard DataRaptor Extract?
Choose 2 answers
- A. It supports complex field mappings
- B. It has better performance at runtime
- C. It is easier to configure
- D. It populates data in PDF and DocuSign format
Answer: B,C
NEW QUESTION # 65
A developer needs to configure a calculation procedure tocalculatethe sum of the entirebase price.
What is the mostefficient way for the developer to meet this requirement?
- A. Create a Postprocessor apex class to calculate the sum.
- B. Create a Preprocessor class to calculate thesum
- C. Add A Calculation Step as SUM (BasePrice).
- D. Add an Aggregation Step as SUM (BasePrice)
Answer: D
Explanation:
Explanation
he Aggregation Step in a calculation procedure allows the developer to perform aggregate functions such as SUM, COUNT, MIN, MAX, and AVG on the output of a previous step. The developer can use this step to calculate the sum of the entire base price by specifying the field name and the aggregation function
NEW QUESTION # 66
A developer is building an OmniScript and needs to retrieve data from a single field in a Salesforce record.
Which OmniScript element does this?
- A. Lookup
- B. Select
- C. HTTP Action
- D. DataRaptor Post Action
Answer: D
NEW QUESTION # 67
......
100% Free OmniStudio-Developer Demo-Trial [Pdf], get it now: https://drive.google.com/open?id=1yf6U1z-MtPbrXxpc0MccjEKQHpomffpH
Accurate & Verified Answers As Seen in the Real Exam here: https://www.prep4pass.com/OmniStudio-Developer_exam-braindumps.html
