Excellent HPE0-S54 Updated 2021 Dumps With 100% Exam Passing Guarantee [Q30-Q55]

Share

Excellent HPE0-S54 Updated 2021 Dumps With 100% Exam Passing Guarantee

Best way to practice test for HP HPE0-S54

NEW QUESTION 30
Your customer has 500 SY480 Gen10 compute nodes running a variety of physical and virtual workloads.
They are looking for a way to get a unified view of the entire environment.
Which product should you recommend?

  • A. HPE OneView for Microsoft System Center
  • B. HPE OneView for VMware vCenter
  • C. HPE OneView for Red Hat Enterprise Virtualization
  • D. HPE OneView Global Dashboard

Answer: D

 

NEW QUESTION 31
Which product provides an interface for customers to monitor device health, hardware events, and contract and warranty status?

  • A. HPE OneView
  • B. Insight Online
  • C. Intelligent Provisioning
  • D. HPE OneView Global Dashboard

Answer: B

 

NEW QUESTION 32
You need to demonstrate the runtime firmware verification scan functionality on a ProLiant DL380 Gen10 server. You find that the option is not available in the UEFI interface.
What is the most likely cause of the problem?

  • A. The server boot mode is set to UEFI
  • B. The file firmware-ilo5-1.10.1.1.x86_64.rpm is the incorrect version
  • C. The required iLO license has not been installed
  • D. The Onboard Administrator has not been initialized

Answer: C

 

NEW QUESTION 33
Refer to the exhibit.

You are installing three Synergy frames for a customer PoC in the configuration shown. The composer is unable to discover the frames.
What is the most likely cause of the problem?

  • A. The management network should be connected to the top and bottom frames
  • B. Composer 2 is in the wrong frame
  • C. The management ring should be connected using the FLM link ports
  • D. Another composer is needed Frame 3

Answer: D

 

NEW QUESTION 34
Match the use case to the management component they should use.

Answer:

Explanation:

 

NEW QUESTION 35
A customer completed a successful Synergy PoC consisting of a single frame with dual composers and dual Virtual Connect SE 40Gb F8 modules. The customer needs additional frames to allow for growth. They require 20GB to each compute module.
How may additional frames can be added to the existing logical enclosure?

  • A. 0
  • B. 1
  • C. 2
  • D. 3

Answer: C

 

NEW QUESTION 36
A customer has thousands of ProLiant and Apollo servers in their datacenter. The customer needs a tool that will help them with firmware and driver updates.
Which iLO Amplifier Pack feature should you emphasize during a conversation with this customer?

  • A. support for iLO Federation
  • B. support for 3Par and StoreVirtual
  • C. firmware management for Integrity servers
  • D. integration with System Center and vCenter Server

Answer: A

 

NEW QUESTION 37
A customer is expanding their blade based infrastructure managed by HPE OneView with an HPE Synergy platform. The customer is familiar with HPE OneView and wants to know if the same management procedures can be used to manage HPE Synergy platform.
How should you respond to this question?

  • A. HPE Synergy can be managed using the same HPE OneView instance that is used to manage HPE BladeSystem platform.
  • B. HPE Synergy must be managed with HPE Systems Insight Manager
  • C. HPE Synergy can be managed by HPE Composer, which is running an embedded version of the HPE OneView
  • D. HPE Synergy can be managed using HPE OneView as long as a separate, dedicated HPE OneView appliance is deployed for HPE Synergy management.

Answer: D

Explanation:
Explanation/Reference:

 

NEW QUESTION 38
What is a new feature in gen10 ProLiant servers?

  • A. RESTful API interface
  • B. Scalable Persistent Memory
  • C. Smart Memory technology
  • D. Active health System log

Answer: B

 

NEW QUESTION 39
Your customer has 500 SY480 Gen10 compute nodes running a variety of physical and virtual workloads. They are looking for a way to get a unified view of the entire environment.
Which product should you recommend?

  • A. HPE OneView for Microsoft System Center
  • B. HPE OneView for VMware vCenter
  • C. HPE OneView for Red Hat Enterprise Virtualization
  • D. HPE OneView Global Dashboard

Answer: D

 

NEW QUESTION 40
What must a customer consider when adding a connection to a Server Profile Template? (Select two.)

  • A. Server Profiles will need to be updated from the template
  • B. Additional Server Profiles will need to be created
  • C. Server Profiles will automatically be refreshed
  • D. The associated Server Profiles will be flagged as inconsistent
  • E. The associated Servers will need to be rebooted

Answer: A,C,E

 

NEW QUESTION 41
A customer needs a server that:
* supports their in-memory database
* is oriented towards business critical workloads
Which questions should you ask before you make a recommendation? (Choose two.)

  • A. How much memory will the application require?
  • B. How will the operating systems and application be deployed?
  • C. How many cores are required to optimize the application
  • D. How important is it for the server to support ASHRAE A3/A4 standards?
  • E. How will the datacenter provide backup power in the event of failure

Answer: A,C

 

NEW QUESTION 42
A customer has experienced an ECC memory event on a critical server while away from the office.
Which HPE cloud-based portal provides the ability to easily track service for future events for the host and the support case raised?

  • A. HPE Insight Online
  • B. HPE Insight Diagnostic
  • C. HPE Agentless Management Service
  • D. HPE Active Health System

Answer: A

 

NEW QUESTION 43
A customer needs to migrate their current c7000 network and Fibre Channel infrastructure to a converged network.
Which interconnect module should the customer use?

  • A. HPE FlexFabric 20/40 F8
  • B. HPE Flex10
  • C. HPE 8Gb Fibre Channel pass-through
  • D. HPE 16Gb/24-port Fibre Channel switch

Answer: A

 

NEW QUESTION 44
A customer temporarily needs to add an additional network connection to a provisioned server that is being actively managed by OneView. The server is currently powered down. Which top level option should they click as the first step?

Answer:

Explanation:

 

NEW QUESTION 45
A customer has an existing Hadoop installation built on DL380 Gen9 24SFF servers. You need to review their existing installation and provide recommendations on how to achieve their stated storage density goal of over
5PB per server cabinet.
Which HPE solution should you recommend?

  • A. HPE Apollo 6500
  • B. HPE Apollo 4510
  • C. HPE ML350 Gen10
  • D. HPE DL580 Gen10

Answer: B

 

NEW QUESTION 46
Match each HPE technology solution to the customer's business need that it can fulfill.

Answer:

Explanation:

Explanation
HPE ConvergedSystems 500 - Mission Critical workloads
HPE D2220sb Storage Blade - Dedicated storage with a one-to-one server-to-storage ratio HPE SB3000c Tape Blade - One button Disaster Recovery HPE SimpliVity - High Availability & Disaster Recovery

 

NEW QUESTION 47
A customer wants to evaluate the new feature in iLO5 that provides the ability to permanently erase all data on a server.
What iLO5 license will the customer require for this proof of concept (PoC)?

  • A. iLO Advanced
  • B. iLO Standard
  • C. iLO Advanced Premium Security
  • D. iLO Standard BladeSystem Edition

Answer: C

 

NEW QUESTION 48
A customer is expanding their blade based infrastructure with HPE Synergy platform. The customer is familiar with HPE Virtual Connect Manager and wants to know if the same management procedures can be used to manage HPE Synergy platform.
How should you answer the customer's concern?

  • A. HPE Synergy can be managed using Virtual Connect Manager as long as an additional license is purchased
  • B. HPE Synergy can be managed by HPE Composer, which is running an embedded version of the HPE OneView.
  • C. HPE Synergy supports Virtual Connect modules, so it can be managed using Virtual Connect Manager
  • D. HPE Synergy must be managed with HPE Systems Insight Manager

Answer: D

 

NEW QUESTION 49
Refer to the exhibit.

You are installing three Synergy frames for a customer PoC in the configuration shown. The composer is unable to discover the frames.
What is the most likely cause of the problem?

  • A. The management network should be connected to the top and bottom frames
  • B. Composer 2 is in the wrong frame
  • C. The management ring should be connected using the FLM link ports
  • D. Another composer is needed Frame 3

Answer: D

 

NEW QUESTION 50
A customer wants to evaluate management software that will allow them to deploy firmware updates and monitor the health of their existing Gen9 and Gen10 servers.
What must you include in the PoC for the evalution?

  • A. HPE OneView
  • B. HPE Intelligent Provisioning
  • C. HPE Insight Online
  • D. HPE One Configuration Advanced

Answer: B

 

NEW QUESTION 51
A customer is learning about the performance enhancements of a new DL380 Gen10 system. How does this system help with performance problems?

  • A. provides scalable persistent memory
  • B. provides compatibility with Intel Broadwell processors
  • C. enables faster L4 cache on CPU
  • D. eliminates the need for Service Level Agreements for Cloud services and VDI

Answer: A

 

NEW QUESTION 52
A customer wants a highly available storage solution inside HPE Synergy that is comparable via OneView and also accessible outside the enclosure to a DR site at another location.
Which product fits the customer's needs?

  • A. VMware vSAN
  • B. HPE 3PAR StoreServ
  • C. SEPH SUSE
  • D. HPE StoreVirtual VSA

Answer: D

 

NEW QUESTION 53
You are configuring a new server for a customer. The customer has given you the following information regarding their environment:
* 2 processors with 22 cores
* 256GB RAM
* 600GB of usable internal storage
* 10GB network, dual connections
* iLO Advanced
* 3 years of 7x24 basic support
Which additional information do you need to determine the best option for internal storage?

  • A. Does the application require a large memory footprint
  • B. Is the application workload sensitive to I/O latency?
  • C. Does the application require RoCE capable adapters?
  • D. Will a Fibre Channel card be required?

Answer: B

 

NEW QUESTION 54
An environmentally sensitive customer has a data center that operates with fresh air cooling.
Which feature of HPE ProLiant Gen10 servers makes them suitable to operate in this environment?

  • A. ACPI 6.1 Compliance
  • B. Intel® Xeon-Platinum 8180M Support
  • C. ASHRAE A4 compliance
  • D. HPE 1600W Flex Slot Platinum Hot Plug Low Halogen Power Supply Support

Answer: C

 

NEW QUESTION 55
......

Designing HPE Server Solutions Certification Sample Questions and Practice Exam: https://www.prep4pass.com/HPE0-S54_exam-braindumps.html