Free 2023 Aruba Certified Switching Professional (ACSP) V1 HPE6-A73 dumps are available on Google Drive shared by Prep4pass
Welcome to download the newest Prep4pass HPE6-A73 PDF dumps: https://www.prep4pass.com/HPE6-A73_exam-braindumps.html ( 124 Q&As)
NEW QUESTION 59
Examine the following AOS-CX configuration:
Based on this configuration, which statement is correct regarding IoT traffic?
- A. The next hop of 10.100.1.2 can be one or more hops away from the AOS-CX switch
- B. If a specific route is not available in the routing table, the traffic will be routed to 10.100.1.2
- C. If 10.100.1.2 is not reachable, the IoT traffic will be automatically dropped by the switch
- D. All routes are ignored in the routing table for IoT traffic, which is routed to 10.100.1.2
Answer: B
NEW QUESTION 60
Examine the network exhibit.
A company has a guest implementation for wireless and wired access. Wireless access is implemented through a third-party vendor. The company is concerned about wired guest traffic traversing the same network as the employee traffic. The network administrator has established a GRE tunnel between AOS-CX switches where guests are connected to a routing switch in the DMZ.
Which feature should the administrator implement to ensure that the guest traffic is tunneled to the DMZ while the employee traffic is forwarded using OSPF?
- A. Classifier policies
- B. User-based tunneling (UBT)
- C. OSPF route maps using the "set metric" command
- D. Policy-based routing (PBR)
Answer: D
Explanation:
Guest traffic can be routed with PBR to use GRE tunnels that terminate in the DMZ.
NEW QUESTION 61
Examine the network topology.
The network is configured for OSPF with the following attributes:
* Core1 and Core2 and ABRs
* Area 1 has 20 networks in the 10.1.0.0/16 range
* Area 0 has 10 networks in the 10.0.0.0/16 range
* Area 2 has 50 networks in the 10.2.0.0/16 range
* The ASBR is importing a static route into Area 1
* Core2 has a summary for Area 2: area 0.0.0.2 range 10.2.0.0/16 type inter-area Here is the OSPF configuration performed on Core1:
Based on the above information, what is correct?
- A. Core1 has no OSPF routes
- B. Area 0 has 13 routes
- C. Area 1 has 23 routes
- D. Core1 has received one LSA Type 5 from the ASBR
Answer: C
NEW QUESTION 62
A company has just purchased AOS-CX switches The company has a free and open-source AAA solution The company wants to implement access control on the Ethernet ports of the AOS-CX switches.
Which security features can the company implement given the equipment that they are using?
- A. Downloadable user roles
- B. Port-based tunneling
- C. Device fingerprinting
- D. Local user roles
Answer: D
NEW QUESTION 63
What is correct regarding rate limiting and egress queue shaping on AOS-CX switches?
- A. Rate limiting and egress queue shaping can be used to restrict inbound traffic
- B. Only a traffic rate and burst size can be defined for a queue
- C. Rate limiting and egress queue shaping can be applied globally
- D. Limits can be defined only for broadcast and multicast traffic
Answer: B
Explanation:
you could apply egress queue shaping to the high priority queues to prevent starvation of low priority queues. Egress queue shaping allows you to apply a maximum bandwidth to a priority queue, as well as a burst size. The port buffers excess traffic up to the burst size and sends the buffered traffic at the max rate, smoothing out bursts while also preventing the high priority queue from exceeding its maximum rate and starving out lower priority queues.
NEW QUESTION 64
A network administrator needs to replace an antiquated access layer solution with a modular solution involving AOS-CX switches The administrator wants to leverage virtual switching technologies. The solution needs to support high-availability with dual-control planes Which solution should the administrator implement?
- A. AOS-CX S400
- B. AOS-CX 8325
- C. AOS-CX 6400
- D. AOS-CX 6300
Answer: C
NEW QUESTION 65
Examine the following AOS-CX switch configuration:
Which statement correctly describes what is allowed for traffic entering interface 1/1/3?
- A. IP traffic from 10.1.12.0/24 is allowed to access 172.0.1.0/23
- B. IP traffic from 10.1.11.0/24 is allowed to access 10.1.110.0/24
- C. IP traffic from 10.0.11.0/24 is allowed to access 10.1.12.0/24
- D. Traffic from 10.0.12.0/24 will generate a log record when accessing 10.0.11.0/24
Answer: D
NEW QUESTION 66
An administrator has an aggregation layer of 8325CX switches configured as a VSX pair. The administrator is concerned that when OSPF network changes occur, the aggregation switches will respond to the changes slowly, and this will affect network connectivity, especially VoIP calls, in the connected access layer switches.
What should the administrator do on the aggregation layer switches to alleviate this issue?D18912E1457D5D1DDCBD40AB3BF70D5D
- A. Implement route aggregation
- B. Reduce the hello and dead interval timers
- C. Implement bidirectional forwarding detection (BFD)
- D. Implement graceful restart
Answer: C
NEW QUESTION 67
How is NetEdit installed at a customer location?
- A. Via an Aruba NetEdit hardware appliance
- B. Via the Aruba Central cloud solution
- C. Via an OVA file and a virtualized platform like VMware's ESXi
- D. Via a DVD using a virtualized platform like Microsoft's Hyper-V
Answer: C
NEW QUESTION 68
An administrator is looking for a data center switching solution that will greatly reduce the likelihood of dropped frames when uplink congestion is experienced. Which AOS-CX switch queuing feature meets the administrator's needs?
- A. VOQ
- B. DWWR
- C. WFQ
- D. FIFO
Answer: A
NEW QUESTION 69
An administrator is replacing the current access switches with AOS-CX switches. The access layer switches must authenticate user and networking devices connecting to them. Some devices support no form of authentication, and some support 802.1X. Some ports have a VoIP phone and a PC connected to the same port, where the PC is connected to the data port of the phone and the phone's LAN port is connected to the switch.
Which statement is correct about this situation?
- A. Device mode should be implemented
- B. 802.1X must be configured to work in fallback mode
- C. The client-limit setting for port access needs to be changed
- D. Device fingerprinting is required for authentication
Answer: B
NEW QUESTION 70
Examine the attached exhibit.
The network administrators is trying to add a remote location as area 3 to the network shown in the diagram.
Based on current connection restrictions, the administrator cannot connect area 3 directly to area 0. The network is using AOS-CX switches.
Which feature should the administrator implement to provide connectivity to the remote location?
- A. OSPFv3
- B. Bidirectional forward detection (BFD)
- C. Not-so-stubby areas
- D. Virtual links
Answer: D
NEW QUESTION 71
An administrator has configured the following on an AOS-CX switch:
What is the correct ACL rule configuration that would allow traffic from anywhere to reach the web ports on the two specified servers?
- A. access-list ip server 10 permit tcp any object-group web-servers object-group web-ports
- B. access-list ip server 10 permit tcp any web-servers web-ports
- C. access-list ip server 10 permit tcp any group web-servers group web-ports
- D. access-list ip server 10 permit tcp any web-servers group web-ports
Answer: D
NEW QUESTION 72
A company has a few servers in a secure, remote location storing highly-confidential documents connected to two AOS-CX 6400 switches configured in a VSX pair The AOS-CX switches perform access control with 802 1X and will be implementing user-based tunneling (UBT) so that Aruba gateway application inspection and stateful firewall policies can be applied to the traffic. The gateways are running version 84 and implement the AP, PEF, and RFP licenses Which licensing is needed for the two AOS-CX switches?
- A. 2 AP and 2 PEF licenses only
- B. 1 AP license only
- C. 1 AP, 1 PEF, and 1 RFP licenses only
- D. 2 AP, 2 PEF, and 2 RFP licenses only
Answer: C
NEW QUESTION 73
An administrator has an aggregation layer of 8325CX switches configured as a VSX pair. The administrator is concerned that when OSPF network changes occur, the aggregation switches will respond to the changes slowly, and this will affect network connectivity, especially VoIP calls, in the connected access layer switches.
What should the administrator do on the aggregation layer switches to alleviate this issue?D18912E1457D5D1DDCBD40AB3BF70D5D
- A. Implement bidirectional forwarding detection (BFD)
- B. Implement route aggregation
- C. Reduce the hello and dead interval timers
- D. Implement graceful restart
Answer: B
Explanation:
"BFD tests the connectivity between two IP addresses in a BFD session. BFD reports when connectivity is lost. The router (or routing switch) can then use that information to take the appropriate actions, depending on the functions to which you have tied BFD"
NEW QUESTION 74
An administrator is supporting a network with the access layer consisting of AOS-CX 6300 and 6400 switches. The administrator needs to quickly deploy Aruba IAPs and security cameras in the network, ensuring that the correct QoS and VLAN settings are dynamically applied to the switch ports. Currently, switches are not configured to do device authentication, and no authentication server exists in the network.
Which AOS-CX feature should the administrator use to dynamically assign the policy settings to the correct switch ports?
- A. Dynamic segmentation
- B. Change of authorization
- C. Device profiles
- D. Voice VLANs
Answer: A
NEW QUESTION 75
Examine the VSX-related configuration of the core layer AOS-CX switch:
A network administrator is troubleshooting a connectivity issue involving the VSX LAG (link aggregation) between the core and access layer switch, during HW replacement of one of the core switches.
Which configuration should the administrator add to the core switch to fix this issue?
- A. ICX-Tx-Core1(config)# interface 1/1/46-1/1/47
ICX-Tx-Core1(config-if-vlan)# active-gateway ip 10.1.11.1 mac 02:02:00:00:01:00 - B. ICX-Tx-Core1(config)# interface 1/1/45
ICX-Tx-Core1(config-if-vlan)# active-gateway ip 192.168.0.0 mac 02:02:00:00:01:00 - C. ICX-Tx-Core1(config)# interface lag 1 multi-chassis
ICX-Tx-Core1(config-if-lag-if)# mtu 9198 - D. ICX-Tx-Core1(config)# vsx
ICX-Tx-Core1(config-vsx)# system-mac 02:01:00:00:01:00
Answer: B
NEW QUESTION 76
......
Who should take the Hewlett Packard Enterprise Aruba Certified Switching Professional Exam
This test is explicitly intended for presales Solutions Architects, Sales Engineers, or people in deals or potentially presales specialized jobs who plan and design Hewlett Packard Enterprise GreenLake arrangements.
Tested Material Used To HPE6-A73: https://www.prep4pass.com/HPE6-A73_exam-braindumps.html
Following are some new HPE6-A73 Real Exam Questions!: https://drive.google.com/open?id=1MHfoB2_hDZ-7ZLJyyOHUj6kc_hU27Rsm
