Get 100% Success with Latest Blue Prism Developer AD01 Exam Dumps Aug 03, 2022
The Best AD01 Exam Study Material and Preparation Test Question Dumps
Difficulty in writing AD01 Exam
Blue Prism Accredited Developer certification is a most privileged achievement one could be graced with. But contrary to common views and opinions certifying with Blue Prism is not that difficult. If the candidates have proper preparation material to pass the AD01 exam with good grades. Certification questions contain the most exceptional questions answers and clarifications which cover the entire course content. Certification questions have a brilliant Blue Prism AD01 exam dumps with most recent and important questions and answers in PDF files. Prep4pass is sure about the exactness and legitimacy of Blue Prism AD01 exam dumps and in this manner. Candidates can easily pass Blue Prism AD01 exam with genuine AD01 exam dumps and get Blue Prism certification skillful surely. These exam dumps are viewed as the best source to understand the Blue Prism Accredited Developer well by simply perusing these example questions and answers. If candidate complete practice the exam with certification AD01 exam dumps along with self-assessment to get the proper idea on Blue prism accreditation questions and answers for successful completion of the certification exam. Then he can pass the exam with good grades easily.
NEW QUESTION 16
The Order System application has been successfully launched and Blue Prism has navigated the application to the following screen:
There is a requirement to ensure this screen is in focus before any further interfacing is done with the screen. Which is the correct configuration to ensure the New Order screen is in focus?
A:
B:
C:
D:
- A. Option C
- B. Option A
- C. Option B
- D. Option D
Answer: A
NEW QUESTION 17
Which of the following indicates a case in a Work Queue is an exception?
B)
C)
D)
- A. Option A
- B. Option D
- C. Option B
- D. Option C
Answer: B
NEW QUESTION 18
Examine the flow below:
An error has been encountered on Page 1 and the exception has bubbled up to be recovered in the Recoverd stage The Yes' path has been taken from the "Throw new Exception?" decision stage. Consider the Throw Exception stage properties below:
How should the properties be configured for the Process to throw a new Business exception, i.e. a different exception to the one encountered in Page?
- A. Configure ExceptionType() in the Exception Type field and ExceptionDetail() in the Exception Detail field. Leave the Preserve the type and detail of the current exception checkbox un-ticked.
- B. Type Business Exception in the Exception Type field and type a custom message in the Exception Detail field.
- C. Tick the Preserve the type and detail of the current exception checkbox. Leave the Exception Type and Exception Detail fields blank
- D. Leave the Exception Type field blank and type "Business Exception" in the Exception Detail field.
Answer: A
NEW QUESTION 19
When entering an option within the Training Order system the relevant option number is entered into the Option number field as below The Option number input field has been spied in Blue Prism:
The following attribute set has been returned by Application Modeller:
Which Attribute can be un-ticked to ensure consistent visibility of the element to Blue Prism?
- A. Window Text
- B. Visible
- C. Class Name
Reason: As the window text is not unique when the value is changed and bp is able to spied at time a error would come. So there is no use of window text. - D. Screen Visible
Answer: A
NEW QUESTION 20
A process has been created but it is not listed in Control Room. The following reasons have been suggested.
1. The process uses objects with different run modes
2 The process has not been published
3. Process validation shows more than 99 errors
4. The user does not have privileges to run processes in Control Room?
Which of the above could cause the process not to be visible in Control Room?
- A. 1 and 2
- B. 1 and 4
- C. 2 and 3
- D. 2 only
Answer: D
NEW QUESTION 21
Consider the following process flow from a sub-page of a process:
What is the problem with this sub-page flow?
- A. The exception stage within the flow should be removed and replaced with an End stage that returns the found data item as an output parameter.
- B. There is nothing wrong with the sub-page flow shown in this image.
- C. The sub-page process flow is missing any retry exception handling that should exist where a process calls object actions that interface with an application.
- D. For better visibility of the process logic the flow steps shown in the image should be on the main page rather than in a sub-page of the process.
Answer: B
Explanation:
Explanation
NEW QUESTION 22
When entering an option within the Training Order system the relevant option number is entered into the Option number field as below. The Option number input field has been spied in Blue Prism:
The following attribute set has been returned by Application Modeller:
Which Attribute can be un-ticked to ensure consistent visibility of the element to Blue Prism?
- A. Class Name
- B. Window Text
- C. Visible
- D. Screen Visible
Answer: B
NEW QUESTION 23
The Work Queue "Customer Onboarding' has a number of Pending Items which may be tagged as "Domestic", "Retail" or "Business" There is also a tag for the 8 digit product code formatted as "Product Code: {product code}" e.g. Product Code: CA123456.
What is the correct configuration to get the next item from the queue that:
* Isn't applying for a loan product i.e. Product Code doesn't begin with "LN" And
* Is a domestic customer
- A. Configure "Domestic; -Product Code: I_N"" in the Tag Filter parameter
- B. Configure "Domestic; -Product Code: LN?" in the Tag Filter parameter
- C. Configure "Domestic + [Product Code] <> LN*"" in the Tag Filter parameter
- D. Configure 'Domestic and Product Code <> LN?" in the Tag Filter parameter
Answer: B
NEW QUESTION 24
Study the following process flow on the Main Page of a process where the intention is to preserve the current exception.
What is wrong with the design?
- A. The exception caught by Recover2 will not be preserved by the Re-Throw Exception stage
- B. The Send Alerts process will never be run
- C. The exception handling is not within an Exception Block.
- D. Because the flow is on the Main Page of the process there should be a 'Re-Throw' Exception stage as there are no parent/calling pages for the exception to 'bubble up' to.
Answer: A
NEW QUESTION 25
Look at this flow diagram from the Main Page of a process in Process Studio:
Thinking about the standard Blue Prism Process Templates, what is wrong with how this Main Page is handling exceptions?
- A. The exception handling in the image does not contain any concurrent exception logic. This means there is nothing stopping every item in the Work Queue being marked with the exact same System Exception.
- B. There is nothing wrong with the Main Page flow shown in the image, it is a copy of Blue Prism's standard Process Template.
- C. Between the Recover and Resume stages there should be logic to reset the application ready for the next case to be worked. For example, this could call the Close Down and Start Up pages.
- D. The Exception Block in the image should be extended to cover all stages in the flow rather than just 4 sub-pages.
- E. It would be better to remove the Exception Block and recover, resume logic, and instead handle any exceptions in the sub-pages. Flag data items could instead be passed up as output parameters from the sub-pages informing the Main Page flow if an exception has occurred.
Answer: D
NEW QUESTION 26
You identify an element in Application Modeller but when you highlight or use that element Blue Prism gives you an error message saying that duplicate elements were found.
Which of the following statements is true?
- A. A code stage interface will need to be created and used for this application, this will give you more flexibility to interact with the application elements.
- B. It will not be possible to interface with the element in a unique way. You will need to use Surface Automation techniques for this element.
- C. You will need to make the attributes you have selected dynamic. This will allow your flow to loop around, incrementing the attribute value until the correct element is found and used.
- D. It is common for duplicate elements to be found based upon the attributes that are ticked by default using the Blue Prism product. Time needs to be spent experimenting with the attribute ticks until a unique, reliable, and consistent selection of attributes are found.
Answer: D
Explanation:
Reason: Is is common as the duplicate elements we are found by default as the attributes are provided by the application not by the blue prism. how do make our elements unique is not done by practicing and experience. ( This is also mentioned in the Foundation course and as well as in other Pdf too)
NEW QUESTION 27
The following Calculation Stage uses the Today function to get the current date as a date value and place it in a data item entitled "Today".
Which of the following statements is correct?
- A. None of these statements are correct
- B. If the data item "Today" is configured with a Data Type of DateTime, an exception will be thrown on execution of the calculation stage
- C. If the data item "Today" is configured with a Data Type of Date, an exception will be thrown on execution of the calculation stage
- D. If the data item "Today" is configured with a Data Type of Text, an exception will be thrown on execution of the calculation stage
Answer: D
NEW QUESTION 28
Which of the following flows can you not create in Blue Prism? (Choose two.)
- A.
- B.
- C.
- D.
Answer: A,B
Explanation:
Explanation
NEW QUESTION 29
A Blue Prism solution works fine when developing and testing it in Process and Object studio but when it is ran in Control Room exceptions occur because of screen elements not being found.
What is the most likely cause?
- A. The most likely cause for the errors seen in Control Room is that best practice use of wait stages has not been followed.
- B. The most likely cause for the errors is that the Object Studio action has not been published and therefore cannot be used by the Process in control room.
- C. The most likely cause for the errors is that your application has changed.
- D. The most likely cause for the exceptions is that best practice exception handling has not been incorporated into the Process.
Answer: A
NEW QUESTION 30
Consider the following diagram from an object studio action:
What is the problem with this flow?
- A. There should be a wait stage at the end of the flow, before the end stage to ensure the flow logic has worked correctly.
- B. There is nothing wrong with the object flow shown in this image.
- C. The Exception Block should be removed from the page so that all exceptions on that page can be recovered.
- D. There is a risk of the flow causing an infinite loop.
Answer: D
NEW QUESTION 31
The Saved Quantity Data Item is configured as a number with the initial value 0.
The Loop Orders stage is configured to loop through the Orders collection.
The Get Quantity stage is configured as follows:
What will the data item Saved Quantity contain after the execution of the page?
- A. 0
- B. 1
- C. 2
- D. 3
Answer: D
NEW QUESTION 32
If you change a session variable when will the new value be available to the process?
- A. Next time resource PC starts
- B. Next time the process starts
- C. Next time a new case is taken from a WQ
- D. Immediately
Answer: D
Explanation:
Explanation/Reference: https://www.quora.com/What-is-the-exact-use-of-session-variables-in-a-blue-prism
NEW QUESTION 33
What is the maximum number of Start stages that a Process sub-page can contain?
- A. 0
- B. Unlimited
- C. 1
- D. 2
Answer: D
NEW QUESTION 34
Study the following process flow on the Main Page of a process where the intention is to preserve the current exception.
What is wrong with the design?
- A. The exception caught by Recover2 will not be preserved by the Re-Throw Exception stage
- B. Because the flow is on the Main Page of the process there should not be a 'Re-Throw' Exception stage as there are no parent/calling pages for the exception to bubble up' to.
- C. The Send Alerts process will never be run
- D. The exception handling is not within an Exception Block.
Answer: A
Explanation:
Explanation
Reason: After resume stage the exception is dead so the Re thrown will not worked.
NEW QUESTION 35
......
Get Ready to Pass the AD01 exam Right Now Using Our Blue Prism Developer Exam Package: https://www.prep4pass.com/AD01_exam-braindumps.html
Enhance Your Career With Available Preparation Guide for AD01 Exam: https://drive.google.com/open?id=1DzyYmloTu8_8A5lyN2ASh_r_FlYqjZ5f
