Latest [Nov 09, 2024] Fortinet NSE7_OTS-7.2 Exam Practice Test To Gain Brilliante Result
Take a Leap Forward in Your Career by Earning Fortinet NSE7_OTS-7.2
Fortinet NSE7_OTS-7.2 certification is targeted towards network security professionals who work with industrial control systems (ICS) and supervisory control and data acquisition (SCADA) systems. These professionals may include network administrators, security analysts, and system engineers. Fortinet NSE 7 - OT Security 7.2 certification is also relevant for professionals who work in industries that rely on OT systems, such as manufacturing, energy, transportation, and utilities. Earning the NSE7_OTS-7.2 certification can enhance a professional's credibility and demonstrate their commitment to staying up-to-date with the latest OT security practices. Additionally, certified professionals may be better equipped to protect their organization's OT systems against cyber attacks, which can result in operational downtime, financial loss, and reputational damage.
NEW QUESTION # 18
Which three methods of communication are used by FortiNAC to gather visibility information?
(Choose three.)
- A. RADIUS
- B. ICMP
- C. TACACS
- D. SNMP
- E. API
Answer: A,D,E
NEW QUESTION # 19
A supervisor is configuring a software switch on a FortiGate device. What must the supervisor configure on FortiGate to control the traffic between member interfaces on the software switch, using firewall policies?
- A. The supervisor must configure a separate forward domain for the software switch.
- B. The supervisor must configure the software switch with at least one wireless interface and one VLAN interface.
- C. The supervisor must add different VLAN interfaces to the software switch.
- D. The supervisor must configure intra-switch-policy to explicit.
Answer: D
NEW QUESTION # 20
Which statemenl about the IEC 104 protocol is true?
- A. IEC 104 uses non-TCP/IP standards.
- B. IEC 104 protects data transmission between OT devices and services.
- C. IEC 104 is used for telecontrol SCADA in electrical engineering applications.
- D. IEC 104 is IEC 101 compliant in old SCADA systems.
Answer: C
NEW QUESTION # 21
Refer to the exhibit, which shows a non-protected OT environment.
An administrator needs to implement proper protection on the OT network.
Which three steps should an administrator take to protect the OT network? (Choose three.)
- A. Use segmentation
- B. Configure firewall policies with industrial protocol sensors
- C. Configure firewall policies with web filter to protect the different ICS networks.
- D. Deploy an edge FortiGate between the internet and an OT network as a one-arm sniffer.
- E. Deploy a FortiGate device within each ICS network.
Answer: B,C,D
NEW QUESTION # 22
As an OT administrator, it is important to understand how industrial protocols work in an OT network. Which communication method is used by the Modbus protocol?
- A. It uses OSI Layer 2 and both the primary/secondary devices always send data during the communication.
- B. It uses OSI Layer 2 and the secondary device sends data based on request from primary device.
- C. It uses OSI Layer 2 and the primary device sends data based on request from secondary device.
- D. It uses OSI Layer 2 and both the primary/secondary devices send data based on a matching token ring.
Answer: B
NEW QUESTION # 23
When you create a user or host profile, which three criteria can you use? (Choose three.)
- A. Administrative group membership
- B. Host or user group memberships
- C. Location
- D. An existing access control policy
- E. Host or user attributes
Answer: B,C,E
Explanation:
Explanation
https://docs.fortinet.com/document/fortinac/9.2.0/administration-guide/15797/user-host-profiles
NEW QUESTION # 24
Refer to the exhibit.
Based on the topology designed by the OT architect, which two statements about implementing OT security are true? (Choose two.)
- A. FortiGate-3 and FortiGate-4 devices must be in a transparent mode.
- B. Micro-segmentation can be achieved only by replacing FortiGate-3 and FortiGate-4 with a pair of FortiSwitch devices.
- C. Firewall policies should be configured on FortiGate-3 and FortiGate-4 with industrial protocol sensors.
- D. IT and OT networks are separated by segmentation.
Answer: C,D
NEW QUESTION # 25
Refer to the exhibits.
Which statement about some of the generated report elements from FortiAnalyzer is true?
- A. FortiGate collects the logs and generates the report to FortiAnalyzer.
- B. The file types confirm the infected applications on the PLCs.
- C. The report confirms Modbus and IEC 104 are the key applications crossing the network.
- D. This report is predefined and is not available for customization.
Answer: C
NEW QUESTION # 26
An OT administrator configured and ran a default application risk and control report in FortiAnalyzer to learn more about the key application crossing the network. However, the report output is empty despite the fact that some related real-time and historical logs are visible in the FortiAnalyzer. What are two possible reasons why the report output was empty? (Choose two.)
- A. The administrator selected the wrong devices in the Devices section.
- B. The administrator selected the wrong hcache table for the report.
- C. The administrator selected the wrong time period for the report.
- D. The administrator selected the wrong logs to be indexed in FortiAnalyzer.
Answer: A,C
NEW QUESTION # 27
Refer to the exhibit. In order for a FortiGate device to act as router on a stick, what configuration must an OT network architect implement on FortiGate to achieve inter-VLAN routing?
- A. Set a unique forward domain on each interface on the network.
- B. Set FortiGate to operate in transparent mode.
- C. Set a software switch on FortiGate to handle inter-VLAN traffic.
- D. Set a FortiGate interface with the switch to operate as an 802.1 q trunk.
Answer: D
NEW QUESTION # 28
Which type of attack posed by skilled and malicious users of security level 4 (SL 4) of IEC 62443 is designed to defend against intentional attacks?
- A. Users with unintentional operator error
- B. Users with low access to resources
- C. Users with substantial resources
- D. Users with access to moderate resources
Answer: A
NEW QUESTION # 29
Which three methods of communication are used by FortiNAC to gather visibility information? (Choose three.)
- A. RADIUS
- B. ICMP
- C. TACACS
- D. SNMP
- E. API
Answer: A,D,E
NEW QUESTION # 30
Which three criteria can a FortiGate device use to look for a matching firewall policy to process traffic?
(Choose three.)
- A. Highest to lowest priority defined in the firewall policy
- B. Source defined as internet services in the firewall policy
- C. Destination defined as internet services in the firewall policy
- D. Lowest to highest policy ID number
- E. Services defined in the firewall policy.
Answer: A,C,E
Explanation:
The three criteria that a FortiGate device can use to look for a matching firewall policy to process traffic are:
A: Services defined in the firewall policy - FortiGate devices can match firewall policies based on the services defined in the policy, such as HTTP, FTP, or DNS.
D: Destination defined as internet services in the firewall policy - FortiGate devices can also match firewall policies based on the destination of the traffic, including destination IP address, interface, or internet services.
E: Highest to lowest priority defined in the firewall policy - FortiGate devices can prioritize firewall policies based on the priority defined in the policy. The device will process traffic against the policy with the highest priority first and move down the list until it finds a matching policy.
NEW QUESTION # 31
What are two benefits of a Nozomi integration with FortiNAC? (Choose two.)
- A. Enhanced point of connection details
- B. Direct VLAN assignment
- C. Importation and classification of hosts
- D. Adapter consolidation for multi-adapter hosts
Answer: A,C
Explanation:
Explanation
The two benefits of a Nozomi integration with FortiNAC are enhanced point of connection details and importation and classification of hosts. Enhanced point of connection details allows for the identification and separation of traffic from multiple points of connection, such as Wi-Fi, wired, cellular, and VPN. Importation and classification of hosts allows for the automated importing and classification of host and device information into FortiNAC. This allows for better visibility and control of the network.
NEW QUESTION # 32
Refer to the exhibit. You are navigating through FortiSIEM in an OT network. How do you view information presented in the exhibit and what does the FortiGate device security status tell you?
- A. In the business service dashboard and there are one or more high-severity security incidents for the FortiGate device.
- B. In the summary dashboard and there are one or more high-severity security incidents for the FortiGate device.
- C. In the PCI logging dashboard and there are one or more high-severity security incidents for the FortiGate device.
- D. In the widget dashboard and there are one or more high-severity incidents for the FortiGate device.
Answer: B
NEW QUESTION # 33
In a wireless network integration, how does FortiNAC obtain connecting MAC address information?
- A. RADIUS
- B. End station traffic monitoring
- C. Link traps
- D. MAC notification traps
Answer: A
Explanation:
Explanation
FortiNAC can integrate with RADIUS servers to obtain MAC address information for wireless clients that authenticate through the RADIUS server.
NEW QUESTION # 34
The OT network analyst runs different level of reports to quickly explore threats that exploit the network. Such reports can be run on all routers, switches, and firewalls. Which FortiSIEM reporting method helps to identify these type of exploits of image firmware files?
- A. OT/loT reports
- B. Compliance reports
- C. CMDB reports
- D. Threat hunting reports
Answer: D
NEW QUESTION # 35
An OT network architect needs to secure control area zones with a single network access policy to provision devices to any number of different networks.
On which device can this be accomplished?
- A. FortiGate
- B. FortiEDR
- C. FortiSwitch
- D. FortiNAC
Answer: A
Explanation:
An OT network architect can accomplish the goal of securing control area zones with a single network access policy to provision devices to any number of different networks on a FortiGate device.
NEW QUESTION # 36
......
Fortinet NSE7_OTS-7.2 exam is a 60-minute exam that consists of 30 multiple-choice questions. NSE7_OTS-7.2 exam covers several topics related to OT security, including OT network design, OT protocols and standards, OT device hardening, and OT security policies and procedures.
Authentic Best resources for NSE7_OTS-7.2 Online Practice Exam: https://www.prep4pass.com/NSE7_OTS-7.2_exam-braindumps.html
Updates Up to 365 days On Developing NSE7_OTS-7.2 Braindumps: https://drive.google.com/open?id=1kYSsViUh877bTwyHGIe3PxL7VzhSE86M
