[Mar-2022] 4A0-113 Exam Dumps Pass with Updated 2022 Nokia OSPF Routing Protocol Exam
Free 4A0-113 Exam Dumps to Pass Exam Easily
Nokia 4A0-113 Exam Syllabus Topics:
| Topic | Details |
|---|---|
| Topic 1 |
|
| Topic 2 |
|
| Topic 3 |
|
| Topic 4 |
|
| Topic 5 |
|
| Topic 6 |
|
| Topic 7 |
|
| Topic 8 |
|
NEW QUESTION 14
Click on the exhibit.
Router R2 learns the networks shown from IS-IS. Router R2 is configured to redistribute routes from IS-IS to OSPF as shown. Assume the OSPF and IS-IS adjacencies are operational.
How many OSPF Type 5 LSAs will router R1 receive from router R2?
- A. 0
- B. 1
- C. 2
- D. 3
- E. 4
Answer: C
NEW QUESTION 15
In an IP datagram, which of the following fields identifies the receiving application?
- A. The protocol field of the transport layer header.
- B. The port field of the transport layer header.
- C. The protocol field of the network layer header.
- D. The port field of the network layer address.
Answer: B
NEW QUESTION 16
In an OSPF Hello packet, which of the following fields must match for all neighbor routers on the segment? Choose three answers.
- A. Stub flag
- B. Hello and Dead intervals PC.
- C. Checksum values
- D. The list of neighbors
- E. Area ID W B.
Answer: A,B,E
NEW QUESTION 17
Identify two attributes of Distance Vector Protocols: (Choose two)
- A. Use holddown timers when topologies change to allow for convergence.
- B. Send information about directly connected links to neighbors at periodic intervals.
- C. Maintain multiple databases: neighbor, topology and routing.
- D. Use split horizon by default.
Answer: A,D
NEW QUESTION 18
Which of the following commands can be used to display the number of SPF computations that have been performed on a router?
- A. show router ospf area <area-id>
- B. show router ospf interface
- C. show router ospf status
- D. show router ospf neighbor
Answer: A
NEW QUESTION 19
An interface is configured on a router for OSPF but the command "show router ospf neighbor" does not show any neighbors. Which of the following is NOT a possible cause?
- A. The interface is included in a different area than the neighbor router.
- B. The router has not received a valid OSPF Hello packet from its neighbor.
- C. An OSPF database description packet has not been received from the neighbor.
- D. The interface facing the neighbor is down.
Answer: C
NEW QUESTION 20
Which type of OSPF LSA has the following characteristics: It is flooded only within the area it originates from and can be originated by any OSPF router within the area (including non-DR routers).
- A. Type 4 ASBR LSA
- B. Type 3 Summary LSA
- C. Type 1 Router LSA
- D. Type 2 Network LSA
Answer: C
NEW QUESTION 21
What are some of the characteristics of Nokia's implementation of non-stop routing? (Choose two)
- A. Uses Graceful Restart to inter-operate with other vendors
- B. Transparent to routing neighbors
- C. No protocol extensions required
- D. Only supported by OSPF and IS-IS
Answer: B,C
NEW QUESTION 22
In an OSPF environment, what must a router receive after it sends out an update?
- A. The router must receive a Hello
- B. The router must receive a new sequence number
- C. The router must receive a Link State Packet
- D. The router must receive an acknowledgment
Answer: D
NEW QUESTION 23
A router receives an OSPF database description packet from a neighbor that references an LSA, which is already in the router's LSDB. The sequence number in the DBD packet is lower than the sequence number of the LSA in the LSDB.
What action does the router take?
- A. The router updates the information in its LSDB with the information received from its neighbor.
- B. The router sends a link-state update to its neighbor.
- C. The router takes no action.
- D. The router sends a link-state request to its neighbor.
- E. The router sends a link-state acknowledgement to its neighbor.
Answer: B
NEW QUESTION 24
What must be configured on the Nokia 7750 SR for RIP to advertise locally attached links?
- A. A policy statement within the router identifying what is to be advertised
- B. Access-lists denoting what is to be advertised
- C. Default metrics for each link
- D. A group and neighbor statement for each peer
Answer: A
NEW QUESTION 25
A default route for a client is also known as the:
- A. Default gateway
- B. Gateway path
- C. Default path
- D. Proxy ARP
Answer: A
NEW QUESTION 26
An OSPF adjacency is stuck in the exstart state. What is the most likely cause?
- A. The interfaces are configured as point-to-point on one side and broadcast on the other.
- B. The router ID is the same on both routers.
- C. The MTU does not match on both interfaces.
- D. OSPF is not enabled on one of the routers.
- E. An OSPF Hello has not been received from the neighbor.
Answer: C
NEW QUESTION 27
Click the exhibit button.
In the topology shown, router R1 is an ASBR configured to export external routes to OSPF. How many type 4 LSAs will be present in the network?
- A. One for each of the external routes exported by router R1.
- B. One for each of the routers in area 0
- C. Type 4 LSAs are not generated in this network topology.
- D. One.
Answer: C
NEW QUESTION 28
What are the types of networks supported on an Nokia 7750 SR for OSPF? (Choose 2)
- A. Point-to-Multipoint
- B. Broadcast
- C. Point-to-Point
- D. Non-Broadcast Multi-Access
Answer: B,C
NEW QUESTION 29
......
4A0-113 Exam Dumps, 4A0-113 Practice Test Questions: https://www.prep4pass.com/4A0-113_exam-braindumps.html
Free 4A0-113 Study Guides Exam Questions and Answer: https://drive.google.com/open?id=1AukRuBRXqCJh9wO79o6qbXXdvTz5wD8w
