[Oct 08, 2021] HPE0-J68 Ultimate Study Guide - Prep4pass
Ultimate Guide to Prepare HPE0-J68 Certification Exam for HPE ASE in 2021
NEW QUESTION 27
Which type of networking switch handles both Ethernet and fibre channel traffic?
- A. Virtual
- B. Edge
- C. Converged
- D. Director
Answer: C
NEW QUESTION 28
You are advising a customer on a new backup strategy to deploy HPE StoreOnce.
What should you recommend to ensure the best storage utilization and performance?
- A. consolidate activity windows for housekeeping tasks
- B. combine management and backup Ethernet traffic
- C. size solution for a single backup device
- D. use separate backup targets for different data types
Answer: A
NEW QUESTION 29
How does the HPE StoreVirtual VSA storage platform scale performance and capacity?
- A. recreates storage pools on multiple devices
- B. eliminates the need for storage controllers
- C. enables access through multiple protocols
- D. aggregates all resources into a single storage pool
Answer: A
NEW QUESTION 30
Which statement describes HPE StoreVirtual Network RAID functionality?
- A. With Network RAID 10+2 data is striped and mirrored across two or more storage systems.
- B. Network RAID 10 requires an even number of storage nodes.
- C. Volumes remain available if an odd number of nodes are available.
- D. Redundancy is managed on a per-volume basis.
Answer: D
Explanation:
Redundancy is managed on a per volume basis to improve storage utilization and to remove any simgle point of failure.
NEW QUESTION 31
A customer's growing environment has a mix of HPE 3PAR StoreServ 8200 with 10K HDD, HPE 3PAR StoreServ 9450, and HPE 3PAR StoreServ 2080D with 3 tiers of storage deployed in the same data center.
The customer needs to optimize performance by being able to move workloads to the most appropriate array as needed.
Which solution enables the customer to achieve this goal?
- A. HPE Smart SAN to provide autonomic federated management.
- B. HPE 3PAR Remote Copy in a Synchronous Long Distance topology.
- C. HPE OneView to automate cpg migration based on user defined policies.
- D. HPE 3PAR Peer Motion with SSMC to manage storage federation.
Answer: D
NEW QUESTION 32
Which statement is correct when discussing the RAID layout of an HPE Nimble HF-series storage system?
- A. RAID 6 or RAID 1 can be set up -18 data drives are used for RAID stripes.
- B. RAID 6 or RAID 1 can be set up -24 data drives are used for RAID stripes.
- C. RAID 6 triple parity is set up -21 data drives are used for RAID stripes.
- D. RAID 6 triple parity is set up -18 data drives are used for RAID stripes.
Answer: C
NEW QUESTION 33
Match the type of storage found in today's market to the HPE storage solution optimized for that capacity?
- A. Nimble - Block
- B. StoreVirtual - Block
- C. MSA - Block
- D. Scalability - Object
- E. StoreEasy - File
- F. HPE 3PAR StoreServ - Block
Answer: F
NEW QUESTION 34
Which statement is true when defining object storage ?
- A. It is most suited for sharing files and characterized by volumes
- B. It is most suited for unstructured data and characterized by containers or buckets
- C. It is most suited for unstructured data and characterized by file share protocols like NFS
- D. suited for database It is most and characterized by containers or buckets
Answer: B
NEW QUESTION 35
A customer has an excisting environment with 3PAR,Nimble and MSA.
They are providing file
servicing from all arrays with multiple virtual machine but preference is not adequate.
What should you add to the environment to increase performance ,increase availability, and reduce management overhead?
- A. StoreEasy 5000
- B. Simplvity 380
- C. StoreEasy 3850 Gateway
- D. 3PAR File Persona
Answer: C
NEW QUESTION 36
Which file protocols are commonly used in HPE StoreOnce environments? (Choose two.)
- A. ZFS
- B. VFS
- C. NTFS
- D. CIFS
- E. NFS
Answer: D,E
NEW QUESTION 37
A customer needs to add another HPE 3PAR StoreServ system and plans to use the federated storage approach.
Which advantages can the customer expect? (Choose two.)
- A. federated deduplication
- B. allows multiple management tools
- C. load balancing
- D. reduced power, cooling, and environmental impacts
- E. easier migration
Answer: C,E
Explanation:
Federated storage-Move data between storage systems in a peer-to-peer relationship simply, dynamically, and nondisruptively to improve storage utilization, balance workloads, and ease storage migration.
NEW QUESTION 38
Which storage sizing tool, designed specifically for the HPE 3PAR StoreServ environment, shows the expected deduplication ratio based on actual data analysis of the customer's current environment?
- A. NinjaThin
- B. NinjaStars
- C. NinjaCrawler
- D. StoreVista
Answer: B
NEW QUESTION 39
Which technology is used in a B-series SAN switch to prevent communicate between unauthorized device?
- A. VSAN
- B. Zoning
- C. Port isolation
- D. IVR
Answer: C
NEW QUESTION 40
During a proof-of-concept you need to implement an inter-switch-link (ISL)between two HPE SN6000B switches. Which port mode must be set enable communication between the switches?
- A. F_PORT
- B. FL_PORT (WRONG)
- C. E_PORT (Correct)
- D. N_PORT
Answer: C
NEW QUESTION 41
Which feature enables a non-disruptive environment where host-based multi-pathing software is not affected in the event of a firmware upgrade?
- A. HPE 3PAR Persistent Cache
- B. HPE 3PAR Access Guard
- C. HPE 3PAR MPIO
- D. HPE 3PAR Persistent Ports
Answer: D
NEW QUESTION 42
A customer has a SAN infrastructure with the HPE C-class blade Enclosure ,and a mix of proliant G7,gen8 and Ge9 server .They require a new storage platform ... How can you confirm the storage array will be supported in the existing environment?
- A. Design and array with the latest firmware ,and recommend that the customer engage HPE point Next to upgrade the existing hardware
- B. Design an array with older version of the firmware to ensure compatibility
- C. Document existing server and SAN information ,and consult SPOCK to ensure firmware compatibility
- D. Check recommended firmware levels in the HP SAN design reference guide to ensure firmware compatibility
Answer: C
NEW QUESTION 43
A customer currently has a CS1000H and wants to upgrade to a CS3000.
What must be considered before upgrading?
- A. A controller upgrade to a CS1000F has to be performed first.
- B. This upgrade is disruptive and needs planned downtime.
- C. A capacity upgrade to a fully populated array has to be performed first.
- D. Timeless storage support is not offered for CS1000H entry-level systems.
Answer: C
NEW QUESTION 44
Which SAN topology offers the highest centralized data access performance?
- A. Meshed
- B. Cascaded
- C. Core-Edge
- D. Ring
Answer: C
NEW QUESTION 45
Due to industry regulation a customer is required to store backup at a separate data center from the company's main data center. The customer application require fast backup and quick restore increase of data lose. Which solution allow the customer to meet both industry and application requirement?
- A. HPE storeServe 3par in main and secondary data center with RCIP replication between arrays
- B. HPR StoreServ 3PAR in main data center and HPE StoreOnce in both main and secondary data center.
- C. HPE Storeserve 3Par in main data center HPE StoreOnce in secondary data center with RMC
- D. Nimble AF series in main data center and Nimble SF series in secondary data center
Answer: C
NEW QUESTION 46
During which event will HPE 3par Storeserv persistent port feature provide transparent and uninterrupted failover (Select two)
- A. Loss of full-mesh cluster interconnect
- B. B-series SAN switch upgrades
- C. Loss of persistent cache
- D. Node maintenance or failure
- E. Firmware upgrade
Answer: D,E
NEW QUESTION 47
Which 3PAR storeServ feature allow to host to continue I/O uninterrupted during a firmware update?
- A. Persistent port (96)
- B. Peer persistence
- C. Persistent Memory
Answer: A
Explanation:
D Persistent Cache
NEW QUESTION 48
A customer has mission-critical applications that intermittently experience heavy disk I/O. The storage speed has the most impact on the application's performance. The customer does not want to dedicate SSD disks to these applications because additional performance is only needed periodically, and moving the volumes between tiers takes too long.
Which HPE StoreVirtual VSA feature can address this customer's challenge?
- A. Storage virtualization
- B. Thin Provisioning
- C. Space Reclamation
- D. Adaptive Optimization
Answer: D
NEW QUESTION 49
Which storage protocol is supported by virtual connect Flex-10?
- A. FC
- B. FCoE
- C. FCIP
- D. ISCSI
Answer: D
NEW QUESTION 50
......
HPE ASE Fundamentals-HPE0-J68 Exam-Practice-Dumps: https://www.prep4pass.com/HPE0-J68_exam-braindumps.html
Use Real HPE0-J68 Dumps - HP Correct Answers: https://drive.google.com/open?id=1eP7zaxP4TxI53vYbSAx2pDxjElBNWR6S
