Latest [Oct 12, 2024] HP HPE0-S59 Exam Practice Test To Gain Brilliante Result
Take a Leap Forward in Your Career by Earning HP HPE0-S59
HP HPE0-S59 exam is a comprehensive test that evaluates an individual's ability to understand and apply the concepts related to HPE compute solutions. HPE0-S59 exam covers a wide range of topics such as HPE compute solutions architecture, planning and designing HPE compute solutions, installing, configuring, and upgrading HPE compute solutions, managing and monitoring HPE compute solutions, and troubleshooting HPE compute solutions. To pass the exam, candidates must demonstrate their proficiency in all these areas and score at least 65% on the exam. The HP HPE0-S59 exam is an excellent way for IT professionals to validate their skills and knowledge in HPE compute solutions and enhance their career prospects.
NEW QUESTION # 13
Which statement about an HPE Oneview support dump is true?
- A. Appliance support dump by default contains a logical enclosure support dump
- B. Preview support dump is available only when creating an appliance support dump
- C. Support dump is a binary file that can be opened only in a dedicated application
- D. Support dump can be created if HPE Virtual Connect modules are installed in the frame
Answer: A
Explanation:
An HPE OneView support dump includes various diagnostic information, and by default, it contains a logical enclosure support dump. This comprehensive dump helps in troubleshooting by providing detailed logs and configuration data from the appliance and the logical enclosures it manages, enabling effective diagnosis of issues within the managed environment.
NEW QUESTION # 14
Your customer reports mat an external FC boot volume for Windows server is visible four times in the Disk Management 1 online and 3 offline.
What should you do to resolve this issue?
- A. Remove the offline disks using Windows Disk Management
- B. Install and configure MPIO on me Windows system
- C. Disable deduplication for this volume at the array level
- D. Remove the offline disks using array management tools
Answer: B
NEW QUESTION # 15
What is one of me benefits of using HPE Composer 2?
- A. A pair of HPE Composer 2 modules can manage 42 frames, compared to 21 frames managed by HPE Composer
- B. The administrator can access an HPE Synergy Composer 2 appliance remotely to perform First Time Setup
- C. HPE Composer 2 has 128GB of memory and 4 AMD CPUs to improve performance of me management system
- D. HPE Composer 2 modules are required to manage HPE virtual Connect SE 100GD F32 Modules for Synergy
Answer: A
Explanation:
One of the key benefits of using HPE Composer 2 is its enhanced scalability. A pair of HPE Composer 2 modules can manage up to 42 frames, which is double the capacity managed by the previous generation HPE Composer (which manages up to 21 frames). This increased capacity allows for more efficient and large-scale management of HPE Synergy environments.
NEW QUESTION # 16
Your customer has 6 logical enclosures spanning 18 HPE Synergy frames. The customer needs to add one more logical enclosure based on 5 HPE Synergy frames How will this change impact the customer environment?
- A. The customer can add a new logical enclosure to an existing setup once all required licenses are added to HPE OneView and associated with the new frames.
- B. The customer can add a new logical enclosure to the existing setup because the maximum number of logical enclosures in a single management ring is not reached.
- C. The customer has to create a new management ring for new logical enclosure because the maximum number of frames m a single management ring is reached.
- D. The customer has to expand the management ring capacity either by adding HPE Composer 2 modules or adding memory to reach 128GB per module.
Answer: C
Explanation:
HPE Synergy management rings have a maximum capacity for the number of frames they can manage. With
18 frames already managed in 6 logical enclosures, adding 5 more frames would exceed this capacity.
Therefore, the customer needs to create a new management ring for the new logical enclosure to ensure proper management and operation.
NEW QUESTION # 17
Your customer reports that they cannot deploy HPE Synergy compute nodes using HPE OneView for VMware vCenter Server (HPE OV4VC).
What should you check during troubleshooting process?
- A. If an compute nodes are added to the vCenter Server
- B. If HPE OneView credentials are added in vCenter Server
- C. If the HPE Oneview instance Is integrated with HPE OV4VC.
- D. If vCenter Server is licensed in the HPE Oneview interface
Answer: B
Explanation:
When troubleshooting the deployment of HPE Synergy compute nodes using HPE OneView for VMware vCenter Server (HPE OV4VC), it's essential to verify that HPE OneView credentials are correctly added in the vCenter Server. Proper integration and authentication are necessary for HPE OV4VC to communicate and manage the compute nodes effectively.
NEW QUESTION # 18
An HPE Synergy customer needs to prevent a timeout and loss of communication during an external switch firmware upgrade.
Click the parameter that the customer should configure within an uplink set to meet this requirement
Answer:
Explanation:
NEW QUESTION # 19
Match HPE SimpliVity term with the definition.
Answer:
Explanation:
Explanation:
Here are the correct matches for each HPE SimpliVity term with their respective definitions:
* ArbiterDefinition:Facilitates communication between nodes and resolves state conflicts to ensure service continuity.
* Compute nodeDefinition:Non-hyperconverged servers that can exist in an HPE SimpliVity environment and provide additional compute capacity while consuming the storage provided by the hyperconverged nodes.
* Management Virtual ControllerDefinition:Provides centralized management and events end-point for vCenter.
* Intelligent Workload OptimizerDefinition:Integrates with VMware Distributed Resources Scheduler to ensure optimal placement of the VM compute resources.
* Arbiter:This component is essential for ensuring that the HPE SimpliVity nodes communicate properly and that any state conflicts are resolved, which is critical for maintaining service continuity.
* Compute node:These are non-hyperconverged servers that add additional compute capacity to the HPE SimpliVity environment. They utilize the storage resources provided by the hyperconverged nodes.
* Management Virtual Controller:This controller is responsible for centralized management and acts as the events end-point for vCenter, allowing for streamlined management of the SimpliVity environment.
* Intelligent Workload Optimizer:This tool integrates with VMware's Distributed Resources Scheduler (DRS) to ensure that virtual machine (VM) compute resources are placed optimally across the infrastructure.
NEW QUESTION # 20
Match each HPE OneView network type with its definition.
Answer:
Explanation:
Explanation:
Here are the correct matches for each HPE OneView network type with their respective definitions:
* Internal networkDefinition:A network that does not utilize any uplink ports and is used for communication between servers in the same frame.
* Tagged networkDefinition:A network in which any tagged packets are dropped and forwarding is done by a MAC address.
* Tunnel networkDefinition:A network with a dedicated set of uplink ports used to pass a group of VLANs without changing the VLAN tags.
* Untagged networkDefinition:A network that contains multiple networks on a single uplink set that allows your customer to share uplinks with those networks.
* Internal network:This network type facilitates communication between servers within the same frame without utilizing uplink ports, providing internal data exchange.
* Tagged network:This network type drops any packets that are tagged and forwards packets based on their MAC address, ensuring only untagged traffic is processed.
* Tunnel network:This type of network uses a specific set of uplink ports to pass VLAN groups while
* preserving the VLAN tags, useful for maintaining VLAN configurations across different network segments.
* Untagged network:This network type enables the sharing of uplinks among multiple networks by placing them on a single uplink set, useful for optimizing network resource usage.
NEW QUESTION # 21
An HPE Synergy customer needs to prevent a timeout and loss of communication during an external switch firmware upgrade.
Click the parameter that the customer should configure within an uplink set to meet this requirement
Answer:
Explanation:
Explanation:
To prevent a timeout and loss of communication during an external switch firmware upgrade, the customer should configure theLACP failover triggerwithin the uplink set. By setting the LACP failover trigger to "All active uplinks transition to offline," the configuration ensures that the traffic will be redirected to available uplinks in the event of an uplink failure or during the upgrade process, maintaining communication and preventing timeouts.
NEW QUESTION # 22
Which statement about a new HPE SimpliVity deployment is true?
- A. New HPE SimpliVity deployments give customer flexible choice of hypervisor
- B. All new HPE SimpliVity models support deduplication and compression
- C. All new HPE SimpliVity models are based on AMD CPUs
- D. New HPE SimpliVity deployments are licensed per node not per physical socket
Answer: B
Explanation:
All new HPE SimpliVity models are designed with integrated deduplication, compression, and optimization capabilities. These features are fundamental to the HPE SimpliVity architecture, providing enhanced storage efficiency and performance. Deduplication and compression reduce the amount of data stored and transmitted, which improves the overall efficiency of data management in the hyper-converged infrastructure.
NEW QUESTION # 23
An administrator tries to open iLO interlace from HPE OneView Instead of being automatically logged in a login prompt displays Where should you start the troubleshooting process?
- A. At the iLO interface to verify whether the SSO certificate is removed from an iLO.
- B. At the iLO interface to verify whether the ILO Advanced license is properly applied
- C. At HPE OneView Interface to verify whether the iLO processor is disabled
- D. At HPE OneView Interface to verify whether the server is In the maintenance mode
Answer: A
Explanation:
When the iLO interface prompts for a login instead of automatically logging in via HPE OneView, a common issue is that the Single Sign-On (SSO) certificate might have been removed or is not properly configured on the iLO. Verifying the presence and validity of the SSO certificate on the iLO interface is a critical step in troubleshooting this issue.
NEW QUESTION # 24
Your customer has experience with utilization sampling for HPE Virtual Connect SE 100 Gb F32 Module for HPE Synergy. They have recently purchased HPE VC FC modules.
What must you be aware of regarding utilization sampling for the new modules?
- A. Utilization sampling for HPE VC FC modules must be enabled manually using CLI.
- B. For HPE VC FC modules, utilization sampling can be enabled once appropriate license is applied
- C. For HPE VC FC modules, utilization sampling is always enabled and cannot be disabled
- D. Utilization sampling works the same way tor any type of HPE Synergy interconnect modules
Answer: C
Explanation:
For HPE Virtual Connect Fibre Channel (VC FC) modules, utilization sampling is always enabled by default and cannot be disabled. This feature ensures continuous monitoring of the module's performance and utilization, providing valuable insights for managing the Fibre Channel network.
NEW QUESTION # 25
Click the option that will allow you to change the ESXI image used In an OS Deployment Plan.
Answer:
Explanation:
Explanation:
TheLifecycle Managerin the vSphere Client interface is used for managing and updating ESXi hosts, including changing the ESXi image used in an OS Deployment Plan. This tool allows administrators to import, export, and apply different ESXi images, ensuring that the hosts are running the desired version and configuration of ESXi.
NEW QUESTION # 26
Which HPE Virtual Connect feature allows an administrator to suppress excessive inbound multicast broadcast and destination lookup failure (OLF) packets?
- A. LLDP tagging
- B. Storm control
- C. Loop protection
- D. Pause flood protection
Answer: B
Explanation:
Storm control is a feature in HPE Virtual Connect that allows administrators to suppress excessive inbound multicast, broadcast, and destination lookup failure (DLF) packets. This feature helps to mitigate the negative impact of network storms, which can degrade network performance and availability. By configuring storm control, administrators can set thresholds to limit the rate of such packets entering the network, ensuring a stable and reliable network environment.
NEW QUESTION # 27
Your customer plans to use HPE Primera to boot HPE Synergy compute nodes. They currently have two HPE Virtual Connect SE 100Gb F32 Module for Synergy modules installed in the frame. The customer wants to use FC as a storage access protocol What must be done to complete this task?
- A. Add FC upgrade licenses in HPE OneView that will enable FC connectivity for the modules
- B. Enter both modules into a maintenance mode, then enable FC connectivity through CLI
- C. FC connectivity on the modules should be enabled through the service console by disabling FCoE.
- D. Enable FC primary and secondary boot on the modules through the HPE OneView interface
Answer: C
NEW QUESTION # 28
Your customer added a new Ethernet network in HPE Oneview mat is used to manage their HPE Synergy platform.
When the customer tries to connect one of the compute nodes to this network through the server profile, this network is not available.
What must be done to fix this issue?
- A. The newly created network must be added to the uplink set within the LIG, and Logical interconnect configuration must be updated from the LIG.
- B. To make this network available to use in the server profile, the customer must enable the Smart Link feature within network definition.
- C. Check the Logical Enclosure settings and verify if the maximum number of networks allowed for this LE is reached.
- D. Check within the server profile which server hardware is used and perform the Refresh operation on this compute node to get the latest adapter information.
Answer: A
NEW QUESTION # 29
Which compute node parameters are captured within server hardware type?
- A. installed operating system
- B. Size of the memory Installed
- C. Number of the CPUs
- D. Mezzanine card configuration
Answer: A
NEW QUESTION # 30
Your customer has the following HPE Synergy setup
- 3 HPE Synergy 12000 Frames
- 4 HPE Virtual Connect SE 100 Gb F32 Modules
- 2 HPE Synergy 50 GO Interconnect Link Modules
- 36 HPE Synergy 480 Gen10 Plus compute modules
- 2 HPE Composer 2 modules
Which statement about this setup is true?
- A. The customer must buy 36 HPE OneView Advanced licenses to manage compute modules
- B. The customer can add one D3940 storage Module to each of the frames
- C. To manage all frames, the customer must buy two additional HPE Composer 2 modules
- D. To use all compute nodes, the customer must create at least two logical enclosures
Answer: A
NEW QUESTION # 31
Your customer plans to deploy VMware ESXi 7 0 U2 and they are looking for a hardware platform mat wilt allow them to use up to 24 TB of physical memory.
Which HPE compute system meets this customer's requirements?
- A. HPE ProLiant DL560 Gen10
- B. HPE ProLiant DL380 Gen 10 Plus
- C. HPE Synergy 480 Gen10 Plus
- D. HPE Superdome Flex 280
Answer: B
NEW QUESTION # 32
Your customer plans to add four HPE Synergy frames to an existing management ring Ail installed frames are equipped with two 2-port FLM modules, while new frames will be equipped with 4-port FLM modules.
Which statement about mixing different FLM modules is true?
- A. Mixing different FLM modules is allowed if all of them have the same firmware version
- B. A management ring can contain mixed frame link module configurations
- C. Existing 2-port FLM modules must be replaced with 4-port FLM modules
- D. A management ring with mixed FLM modules cannot have more than 12 frames
Answer: B
Explanation:
In HPE Synergy, a management ring can indeed contain mixed frame link module (FLM) configurations. This means you can have a mix of 2-port and 4-port FLM modules within the same management ring without needing to replace the existing 2-port modules. This flexibility allows for gradual upgrades and scalability within the management ring.
NEW QUESTION # 33
Your customer manages HPE Synergy using HPE OneView. For one of its projects, the company purchased
50 HPE.
ProLiant DK385 Gen10 Plus v2.They plan to manage the new systems using HPE OneView as well.
What should the customer do to manage rack system using HPE OneView?
- A. Deploy an HPE OneView virtual appliance, and, after configuration, use it to manage only the rack systems.
- B. Deploy HPE OneView Global Dashboard and add the rack systems there, as AMD systems are not directly in HPE OneView.
- C. add the rack system to the HPE OneView instance used to manage HPE Synergy to centralize management of all systems.
- D. connect the rack system to an IPDU and add the IPDU to the HPE. OneView instance that is used for HPE synergy management.
Answer: C
Explanation:
HPE OneView can manage both Synergy and ProLiant systems, allowing for centralized management of all infrastructure components. By adding the HPE ProLiant DL385 Gen10 Plus v2 systems to the existing HPE OneView instance used for Synergy, the customer can streamline management processes and maintain a unified management interface for all systems.
NEW QUESTION # 34
Which statement about HPE Apollo 2000 Gen10 Plus platform is true?
- A. It is fully managed using HPE OneView including all connections
- B. It can support a single processor only and up to 4 per chassis
- C. It offers servers with AMD EPYC and Intel Xeon Scalable CPUs
- D. It is equipped with HPE Persistent memory by default
Answer: B
NEW QUESTION # 35
Your customer is implementing an HPE Synergy solution based on three frames.
Click each of the ports that can be used to connect satellite modules.
Answer:
Explanation:
Explanation:
The QSFP+ ports (Q1 and Q2) on the HPE Virtual Connect SE 100Gb F32 Module for HPE Synergy can be used to connect satellite modules. These ports are designed to handle high-speed connectivity required for linking additional frames and expanding the Synergy infrastructure.
NEW QUESTION # 36
......
Authentic Best resources for HPE0-S59 Online Practice Exam: https://www.prep4pass.com/HPE0-S59_exam-braindumps.html
Updates Up to 365 days On Developing HPE0-S59 Braindumps: https://drive.google.com/open?id=1ZZ-AtXIOJ4q4kB4RbZF-1r9ol6WFT64w
