[Sep-2021] Updated CCE-V 1Y0-403 Exam Questions BUNDLE PACK
Master The Citrix Content 1Y0-403 EXAM DUMPS WITH GUARANTEED SUCCESS!
NEW QUESTION 55
Scenario: A Citrix Architect needs to implement XenApp and XenDesktop. Based on the assessment and early stages of the design, the architect has identified the requirements as shown in the Exhibit.
Click the Exhibit button to view the requirements.
Which tier of storage should the architect consider implementing, based on the requirements in the Exhibit?
- A. SAN
- B. Local
- C. DAS
- D. NAS
Answer: B
Explanation:
Citrix Handbook Local Storage properties: Low implementation costs, High performance, for small to medium production and test environments
NEW QUESTION 56
Scenario: A Citrix Architect is designing a new Citrix Virtual Apps and Desktops environment. The architect has identified the Resource Layer requirements shown in the exhibit.
Click the Exhibit button to view the requirements.
Which feature of Citrix Profile Management could help the architect address the Graphic Designers Group requirements?
- A. NTUser.dat backup
- B. Profile streaming
- C. Profile caching
- D. Active write back
Answer: D
Explanation:
Explanation/Reference: https://support.citrix.com/article/CTX224498
NEW QUESTION 57
Scenario: A Citrix Architect needs to design a new XenApp and XenDesktop environment. Due to licensing and compliance reasons, the customer has requested that users connecting from external locations must NOT be presented with applications from the Microsoft Office suite.
How should the architect ensure that users are only presented with Microsoft Office applications when connecting to the environment from internal locations?
- A. Configure a separate Store for external connections, configure keywords on all Microsoft Office applications, and use Set-DSResourceFilterKeyword to enable filtering.
- B. Use the existing Store for external connections, configure keywords on all Microsoft Office applications, and use Citrix ADC Content Switching to enable filtering.
- C. Use the existing Store for external connections, configure keywords on all Microsoft Office applications, and use Set-DSResourceFilterKeyword to enable filtering.
- D. Configure a separate Store for external connections, configure keywords on all Microsoft Office applications, and use Citrix ADC Content Switching to enable filtering.
Answer: A
Explanation:
ADC content switching does not apply
https://docs.citrix.com/en-us/netscaler/12/content-switching.html
Content Switching enables the NetScaler appliance to direct requests sent to the same Web host to different servers with different content. For example, you can configure the appliance to direct requests for dynamic content (such as URLs with a suffix of .asp, .dll, or .exe) to one server and requests for static content to another server. You can configure the appliance to perform content switching based on TCP/IP headers and payload.
NEW QUESTION 58
Scenario: A Citrix Architect is designing a new Citrix Virtual Apps and Desktops environment for a company that will utilize Citrix Provisioning as a solution to deploy Virtual Delivery Agent (VDA) machines. After reviewing the existing infrastructure, the architect determined that VDA machines are all on the same network subnet, and are a mixture of Unified Extensible Firmware Interface (UEFI)-based technology and legacy BIOS- based virtual machines (VMs). Management has specified that the proposed solution should be configurable from a central location without the need to create new catalogs or device collections.
Which three target device boot methods can the architect recommend for this deployment? (Choose three.)
- A. BDM ISO
- B. PXE
- C. BDM disk partition
- D. BIOS-embedded
- E. DHCP options
Answer: A,B,E
NEW QUESTION 59
Scenario: A Citrix Architect needs to design a new XenApp and XenDesktop environment.
The architect has determined the user groups and FlexCast model listed in the Exhibit during the high-level design. Click the Exhibit button to view the user group and FlexCast model details.
Which graphics protocol should the architect select for the highlighted group in the Exhibit?
- A. Thinwire (Legacy)
- B. Thinwire+
- C. Framehawk
- D. H.264
Answer: B
Explanation:
Thinwire - Based on the original Citrix patents from the 1990s that thinly transfers data over a wire. Use Thinwire in the majority of use cases as it provides a good user experience with minimal resource costs. There are two variations of Thinwire Legacy - optimized for Windows 7 and Windows 2008R2 graphic engines (GDI/GDI+).
Thinwire+ - optimized for Desktop Windows Manager (DWM) graphics engine in Windows 8, Windows 10, Windows 2012 and Windows 2016
NEW QUESTION 60
Scenario: A Citrix Architect is designing a new Citrix Virtual Apps and Desktops environment. Citrix Provisioning (PVS) has been selected for image management. The PVS vDisk store requires high fault tolerance and the ability to support dual drive failure.
Which RAID level could the architect use for the PVS vDisk store?
- A. RAID 0
- B. RAID 1
- C. RAID 6
- D. RAID 5
Answer: C
Explanation:
Explanation/Reference: https://docs.citrix.com/en-us/xenapp-and-xendesktop/7-15-ltsr/citrix-vdi-best-practices/design/ design-userlayer5.html
NEW QUESTION 61
Scenario: A Citrix Architect is designing a new Citrix Virtual Apps and Desktops environment. Management has advised that they have a limited budget for the new solution. However, they still expect the design to account for future growth without the need to redesign or repurchase central hardware components.
Additionally, the current 1 Gb network infrastructure CANNOT be replaced within the scope of this project. The architect has determined that the company can support both current and future load with 2 to 3 separate Virtual Delivery Agent (VDA) machine images.
Which two features should the architect consider while designing the Citrix Hypervisors for the proposed Citrix environment? (Choose two.)
- A. Boot from SAN
- B. Thin provisioning
- C. iSCSI storage
- D. Intellicache
- E. vApps
- F. PXE boot with PVS
Answer: A,B
Explanation:
Explanation/Reference:
NEW QUESTION 62
Scenario: A Citrix Architect is designing a new Citrix Virtual Apps and Desktops environment. Based on some initial discussions about the business goals and objectives of the company, the architect collected the information shown in the exhibit.
Click the Exhibit button to view the information.
What should the architect recommend to meet customer requirements?
- A. Have users connect to an authenticated store through Citrix Workspace app for Web sites.
- B. Have users connect to an authenticated store through the Citrix Virtual Apps Services URL.
- C. Have users connect to an unauthenticated store through the Citrix Workspace app for Web sites.
- D. Have users connect using a Desktop Appliance site created in the StoreFront console.
Answer: B
NEW QUESTION 63
Scenario: The IT team of a company configured its Citrix environment on Microsoft Azure. Load on the servers is nominal during the off season, but during peak season, load increases on the infrastructure servers. This load varies from year to year. A Citrix Architect is asked to design a solution that dynamically increases and decreases the number of infrastructure servers.
What should the architect recommend the IT team create in Microsoft Azure to meet this demand?
- A. Availability domains
- B. Resource group
- C. Scale sets
- D. Availability sets
Answer: B
Explanation:
Explanation/Reference: https://docs.citrix.com/en-us/advanced-concepts/implementation-guides/citrix-adc-vpx-on-azure- autoscale-deployment-guide.html
NEW QUESTION 64
Scenario: A Citrix Architect needs to design a new XenApp and XenDesktop environment.
The architect has identified the Resource Layer requirements shown in the Exhibit.
Click the Exhibit button to view the requirements.
Which feature of Citrix Profile Management could help the architect address the Graphic Designers group requirements?
- A. Profile streaming
- B. File exclusions
- C. Active Write Back
- D. Profile caching
Answer: A
NEW QUESTION 65
Scenario: A Citrix Architect is designing a new Citrix Virtual Apps and Desktops environment.
The table in the exhibit lists details about the requirements of the current user groups and their Virtual Delivery Agent (VDA) machine workloads.
Click the Exhibit button to view the table.
The architect should scale the hardware used to host the virtual machines (VMs) for User Group 1 to cores. (Choose the correct option to complete the sentence.)
- A. 0
- B. 1
- C. 2
- D. 3
- E. 4
Answer: D
NEW QUESTION 66
Scenario: A Citrix Architect needs to design a new XenApp and XenDesktop environment.
The table in the Exhibit lists details about the requirements of the current user groups and their Virtual Delivery Agent (VDA) machine workloads.
Click the Exhibit button to view the table.
The architect should scale the hardware used to host the VMs for User Group 1 to ______ cores. (Choose the correct option to complete the sentence.)
- A. 0
- B. 1
- C. 2
- D. 3
- E. 4
Answer: D
Explanation:
Note: (vCPUs per VM x VMs per Host) / Overcommit (2 x 40) / 8 = 10
80 vCPU/8 = 10 pCPU. You can also get there with the Rule of 5 and 10. So 40 VMs/5 = 8 pCPU. So 8- 10 pCPU should allow plenty for performance hits since we would choose 16 cores. Also, 8:1 is a high number. I like 6:1 better. But they are trying to turn it into a math problem, so you basically go for close without going over. 8/10/13... all would.be good on hardware with 16 cores.
https://matthewmccarron.wordpress.com/
https://www.citrix.com/blogs/2017/03/20/citrix-scalability-the-rule-of-5-and-10/ Let's say you just bought some new blades from Cisco and they're equipped with dual sockets and 16 cores each (i.e. 2*16). You're about to embark on your XenDesktop project and you're wondering how many VDIs each blade can support. Well, 160 VMs, of course! All I did there was multiply the number of physical cores in the box (32) by the magical XenDesktop multiplier (5).
NEW QUESTION 67
Scenario: A Citrix Architect is designing a new Citrix Virtual Apps and Desktops environment. The design has a Primary Zone and 3 Satellite Zones. Each Satellite Zone has a number of Virtual Delivery Agent (VDA) machines that belong to a single Delivery Group spanning all 3 Satellite Zones.
Click the Exhibit button to view more details about the configuration.
How should the architect ensure that the SharePoint application has optimal performance for all user groups?
- A. Edit the application properties to set Zone-SFO as the Home Zone for SharePoint.
- B. Edit the zone properties to only allow SharePoint to launch in Zone-SFO.
- C. Publish SharePoint in an individual Delivery Group within each zone.
- D. Use PowerShell to change the process priority to high for SharePoint within Zone-SFO.
Answer: A
Explanation:
Reference:
https://docs.citrix.com/en-us/citrix-virtual-apps-desktops-service/manage-deployment/ zones.html#manage-home-zones-for-applications
NEW QUESTION 68
Scenario: A Citrix Architect is assessing an existing infrastructure for a company that has storage challenges as a result of hyper-growth. They currently have a large IT infrastructure that consists of 15 hypervisor hosts and more than 200 virtual machines (VMs) worldwide. Management has advised the architect that they need to improve their storage infrastructure to include high performance and scalability.
Which storage solution should the architect implement within this infrastructure?
- A. Local
- B. SAN
- C. DAS
- D. NAS
Answer: B
NEW QUESTION 69
Scenario: A Citrix Architect is designing a multi-data center Citrix Virtual Apps and Desktops environment that will use Citrix Provisioning (PVS) to manage Virtual Delivery Agent (VDA) machine images. Each data center will have a separate PVS farm. During design discussions, the architect created a diagram to depict the way in which vDisk files will be replicated among PVS farms, based on the available storage for the vDisk stores.
Click the Exhibit button to view the diagram.
Overall, the customer has identified 3 objectives for the image-replication process:
* Administrative time required to replicate images among farms must be minimized.
* The process must be usable by storage administrators without PVS farm administrative permissions.
* Pre-existing infrastructure and processes should be used where possible.
Which method should the architect use to replicate vDisk files among data centers?
- A. SAN replication
- B. Microsoft Distributed File System Replication (DFSR) Namespaces
- C. Scheduled RoboCopy commands
- D. vDisk Replicator Utility
- E. Manual copy
Answer: A
NEW QUESTION 70
Scenario: A Citrix Architect is designing a new Citrix Virtual Apps and Desktops environment. The architect has identified the Resource Layer requirements shown in the exhibit.
Click the Exhibit button to view the requirements.
Which feature of Citrix Profile Management could help the architect address the Graphic Designers Group requirements?
- A. NTUser.dat backup
- B. Profile streaming
- C. Profile caching
- D. Active write back
Answer: D
Explanation:
https://support.citrix.com/article/CTX224498
NEW QUESTION 71
Scenario: A Citrix Consultant is designing a new Citrix Virtual Desktops environment. During the user segmentation process, a Citrix Architect collected a small amount of data about user requirements, but was NOT able to create well-defined user groups.
Which user-segmentation actions should the consultant pursue?
- A. Analyze existing data, define user groups, and confirm user requirements.
- B. Collect user data, confirm user groups, and identify user requirements.
- C. Collect user data, define user groups, and identify user requirements.
- D. Analyze existing data, confirm user groups, and identify user requirements
Answer: C
NEW QUESTION 72
Scenario: A Citrix Architect is designing a new Citrix Virtual Apps and Desktops environment for a marketing company. Several departments within the company utilize 3D applications based on OpenGL and Direct X.
These applications run as hosted applications within 5 different virtual machines running on a single Citrix Hypervisor host. The host is configured with 1 single physical GPU running Intel Iris Pro technology.
Which HDX 3D Pro method should the architect utilize for these 3D applications?
- A. CUDA-virtualized GPU
- B. Pass-through GPU
- C. Software-virtualized GPU
- D. Hardware-virtualized GPU
Answer: B
Explanation:
Explanation/Reference: https://www.citrix.com/content/dam/citrix/en_us/documents/products-solutions/virtualize-3d- professional-graphics-design-guide.pdf (8)
NEW QUESTION 73
Scenario: A Citrix Architect is developing a Citrix Provisioning (PVS) design for a healthcare organization. The initial design places all PVS farm components in the primary data center of the organization. The customer asks if the vDisk can be streamed from PVS servers in the primary data center to target devices located in a secondary data center in another region, while still maintaining good performance. The data centers are connected with a 10 GB link with approximately 20 ms of latency.
The architect recommends against the organization pursuing this approach.
Which statement is a relevant reason for this recommendation?
- A. This configuration does NOT provide sufficient bandwidth for streaming traffic.
- B. This configuration prevents the Subnet Affinity feature from being implemented.
- C. This configuration does NOT provide sufficient connectivity between PVS servers and the farm database.
- D. This configuration would introduce excessive latency in streaming traffic.
Answer: D
Explanation:
Explanation
Explanation/Reference: https://support.citrix.com/article/CTX220651
NEW QUESTION 74
Scenario: A Citrix Architect is designing a new Citrix Virtual Apps and Desktops environment. The environment consists of 4 Citrix Hypervisor hosts, each running 10 virtual machines (VMs). To meet company security standards for the environment, the IT team will need to perform routine VM snapshots, data backups, and threat scans.
Which two matters should the architect consider when securing a backup plan for the company? (Choose two.)
- A. VM snapshots and data backups are NOT required for backup purposes if an enterprise-grade, geo- replicated, high-security storage solution is deployed
- B. Administrative access to the storage location that maintains backups and archived data should be monitored
- C. RAID technology is supported for secure VM backups and snapshots when using local host storage
- D. There are various delegated administrator roles that will have permissions to perform VM snapshots
- E. Running simultaneous security scans on different VMs can reduce host resource utilization
Answer: A,E
NEW QUESTION 75
Scenario: A Citrix Architect is designing a new XenApp and XenDesktop environment and needs to determine which endpoints to include. Based on discussions with various departments, the user requirements listed in the Exhibit were collected.
Click the Exhibit button to view the requirements.
In addition to the user requirements, the architect has identified the following organizational requirements:
Minimize total cost of ownership (TCO)
Minimize maintenance costs
Which endpoint type should the architect use for the Product Development group, based on the requirements?
- A. BYOD laptop/notebook
- B. Corporate-owned laptop/notebook
- C. Corporate-owned thin client
- D. Corporate-owned high-performance workstation
- E. Corporate-owned standard desktop
Answer: E
Explanation:
NEW QUESTION 76
Scenario: The IT team of a company configured its Citrix environment on Microsoft Azure. Load on the servers is nominal during the off season, but during peak season, load increases on the infrastructure servers. This load varies from year to year. A Citrix Architect is asked to design a solution that dynamically increases and decreases the number of infrastructure servers.
What should the architect recommend the IT team create in Microsoft Azure to meet this demand?
- A. Resource group
- B. Scale sets
- C. Availability domains
https://docs.microsoft.com/en-us/azure/virtual-machine-scale-sets/overview#:~:text=Azure%20virtual%20machine%20scale%20sets%20let%20you%20create%20and,group%20of%20load%20balanced%20VMs.&text=Scale%20sets%20provide%20high%20availability,a%20large%20number%20of%20VMs. - D. Availability sets
Answer: B
NEW QUESTION 77
......
Pass Citrix 1Y0-403 Exam – Experts Are Here To Help You: https://www.prep4pass.com/1Y0-403_exam-braindumps.html
Get Latest CCE-V 1Y0-403 Practice Test For Quick Preparation: https://drive.google.com/open?id=12ol9gcodmDZjZtYFLSmP3uAVuJC0J_sb
