[UPDATED 2022] VMware 2V0-41.20 Questions Prepare with Free Demo of PDF
NEW 2022 Certification Sample Questions 2V0-41.20 Dumps & Practice Exam
For more info read reference:
How to study the Professional VMware NSX-T Data Center 2V0-41.20 Exam
For the Professional VMware NSX-T Data Center 2V0-41.20 Exam, VMware offers an interactive examination simulation Exam. Exam. A study query and lab behaviour are used in the simulation to Demonstrate the setting for the test. For candidates, VMware offers an online community. This, group includes useful knowledge from other candidates and seniors, which are handled by VMware certification personnel. The community can be located here
Hands-On Laboratories for VMware NSX technologies are also offered by VMware. These laboratories have an environment in which the items covered in this exam can be worked on. The labs can be accessed here
We recommend a combination of hands-on experience, completion of the training course, and self-study via the 2V0-41.20 practice dumps in the areas described in the Exam Outline section of this exam guide as preparation for this exam.
Hover on to VMware Website and download the Exam guide for the preparation of this exam. Check for the topics mentioned in the Exam Outline section of this guide to review the online documentation, tip sheets, and user guides and study the details relevant to those topics. Refer to the links at the end of this document for more study material.
NEW QUESTION 39
Which command is used to display the network configuration of the Tunnel Endpoint (TEP) IP on a bare metal transport node?
- A. tcpdump
- B. debug
- C. ifconfig
- D. ipconfig
Answer: C
Explanation:
Reference:
https://docs.vmware.com/en/VMware-NSX-T-Data-Center/3.0/installation/GUID-B7E7371E-A9F6-4880-B184-E00A62C0C818.html
NEW QUESTION 40
In a NSX-T Data Center environment, an administrator is observing low throughput and congestion between the Tier-0 Gateway and the upstream physical routers.
Which two actions could address low throughput and congestion? (Choose two.)
- A. Add an additional vNIC to the NSX Edge node.
- B. Configure a Tier-1 gateway and connect it directly to the physical routers.
- C. Deploy Large size Edge node/s.
- D. Configure ECMP on the Tier-0 gateway.
- E. Configure NAT on the Tier-0 gateway.
Answer: C,D
NEW QUESTION 41
An NSX administrator is planning to deploy a multi-tier routing topology in their NSX-T Data Center environment to provide north-south connectivity for the VMs.
Which routing component must be deployed?
- A. Layer 2 Gateway
- B. Edge Services Gateway
- C. Tier-0 Gateway
- D. Tier-1 Gateway
Answer: C
NEW QUESTION 42
Which NSX CLI command is used to check the GENEVE tunnel status on ESXi transport node?
- A. get transport-node tunnel status
- B. get transport-node tunnel state
- C. get host-switch <Host-Switch-Name> tunnels
- D. get host-switch <Host-Switch-Name> tunnel status
Answer: C
Explanation:
Reference:
https://vdc-download.vmware.com/vmwb-repository/dcr-public/cc42e3c1-eb34-4567-a916-147e79798957/8264605c-a5e1-49a8-b603-cc78621eeeab/cli.html#get%20host-switch%20%3Chost-switch-name%3E%20tunnels
NEW QUESTION 43
What are two types of supported IPSec VPNs in NSX-T Data Center? (Choose two.)
- A. Open source based IPSec VPN
- B. policy-based IPSec VPN
- C. SSL based IPSec VPN
- D. Layer-7 based IPSec VPN
- E. route-based IPSec VPN
Answer: B,E
NEW QUESTION 44
An NSX administrator has deployed an NSX Edge on a bare-metal server.
Which command registers the NSX Edge with the NSX Manager?
- A. join policy-manager <nsx-manager-ip> username root password <root-password> thumbprint <nsx-manager-thumbprint>
- B. join management-cluster <nsx-cluster-IP> username admin password <admin-
password> thumbprint <nsx-manager-thumbprint> - C. join management-plane <nsx-nanager-ip> username admin password <admin-password> thumbprint <nsx-manager-thumbprint>
- D. join cluster <nsx-cluster-IP> username root password <root-password> thumbprint
<nsx-manager-thumbprint>
Answer: C
NEW QUESTION 45
A company is deploying a NSX-T Data Center micro-segmentation in their vSphere environment to secure a simple application composed of web, app, and database tiers.
The naming convention will be:
* WKS-WEB-SRV-XXX
* WKY-APP-SRR-XXX
* WKI-DB-SRR-XXX
What is the optimal way to group them in order to enforce security policies from NSX-T Data Center?
- A. Create an Ethernet based security policy.
- B. Group all by means of tags membership.
- C. Use Edge as a firewall between tiers.
- D. Do a service insertion to accomplish the task.
Answer: B
NEW QUESTION 46
What are the advantages of using a Tier-0 Gateway in ECMP mode? (Choose two.)
- A. traffic load balancing
- B. increased north/south bandwidth
- C. stateful services leveraged
- D. Failover of services
- E. traffic predictability
Answer: A,B
Explanation:
Explanation
From ICM manual:
Equal-cost multipath (ECMP) routing has several features and functions: * ECMP routing increases the north-south communication bandwidth by combining multiple uplinks.
* ECMP routing performs traffic load balancing.
* ECMP routing provides fault tolerance for failed paths.
* A maximum of eight ECMP paths are supported.
* Hashing is based on 2-tuple IP source and destination addresses.
* ECMP routing is only available on Tier-0 gateways.
NEW QUESTION 47
Which command is used to display the network configuration of the Tunnel Endpoint (TEP) IP on a bare metal
transport node?
- A. tcpdump
- B. debug
- C. ifconfig
- D. ipconfig
Answer: C
NEW QUESTION 48
An NSX administrator is configuring the KVM hypervisor host as a transport node and wants to apply the Failover Order as a NIC teaming policy.
Which profile allows the administrator to configure the NIC Teaming policy as Failover Order?
- A. Uplink Profile
- B. Transport Node Profile
- C. Host Switch Profile
- D. N-VDS/VDS Profile
Answer: A
NEW QUESTION 49
A security administrator needs to configure a firewall rule based on the domain name of a specific application.
Which field in a distributed firewall rule does the administrator configure?
- A. Source
- B. Service
- C. Profile
- D. Policy
Answer: C
NEW QUESTION 50
Which command is used to change the NSX CU administrator password?
- A. set user admin password <password> old-password <old-password>
- B. set user administrator password <password> old-password <old-password> To change the password of an account run: set user admin password my-new-pwd old-password my-old-pwd
- C. set user administrator password <old-password> <new-password>
- D. set user admin password <old-password> <new-password>
Answer: A
NEW QUESTION 51
An NSX administrator would like to export syslog events that capture messages related to NSX host preparation events.
Which message ID (msgid) should be used in the syslog export configuration command as a filter?
- A. MONITORING
- B. GROUPING
- C. FABRIC
- D. SYSTEM
Answer: C
NEW QUESTION 52
Which CLI command is used to disable SSH timeout on NSX Manger and NSX Edge nodes?
- A. nsxcli ssh session on
- B. set cli ssh timeout 0
- C. set cli-timeout 0
- D. set esxcli ssh session off
Answer: C
NEW QUESTION 53
An NSX administrator would like to export syslog events that capture messages related to NSX host preparation events.
Which message ID (msgid) should be used in the syslog export configuration command as a filter?
- A. MONITORING
- B. GROUPING
- C. FABRIC
- D. SYSTEM
Answer: C
Explanation:
Explanation
https://docs.vmware.com/en/VMware-NSX-T-Data-Center/3.0/nsxt_30_admin.pdf
NEW QUESTION 54
Which CLI command shows syslog on NSX Manager?
- A. show log manager follow
- B. /var/log/sysloq/syslog.log
- C. get log-file auth.log
- D. get log-file syslog
Answer: D
Explanation:
Reference:
https://docs.vmware.com/en/VMware-NSX-T-Data-Center/3.0/administration/GUID-406AF9C3-E8F7-447A-8E3D-92AFB9D5E973.html
NEW QUESTION 55
What needs to be configured on a Tier-0 Gateway to make NSX Edge Services available to a VM on a VLAN- backed logical switch?
- A. VLAN Uplink
"The service interface is a special-purpose port to enable services for mainly VLAN-based networks. North-south service insertion is another use case that requires a service interface to connect a partner appliance and redirect north-south traffic for partner services. Service interfaces are supported on both active-standby Tier-0 logical routers and Tier-1 routers. Firewall, NAT, and VPNs are supported on this interface. The service interface is also a downlink" - B. Loopback Router Port
- C. Downlink interface
- D. Service interface
Answer: D
NEW QUESTION 56
Which tool injects packets and provides various observation points along the packet's path between two NSX-T managed objects?
- A. Traceflow
- B. IPFIX
Reference: https://www.google.com/url?sa=t&rct=j&q=&esrc=s&source=web&cd=7&ved=2ahUKEwjw0duct_nmAhUJ1BoKHVrgACcQFjAGegQIBxAC&url=ftp%3A%2F%2Fftp.inwinstack.com%2FOther%2FAI-NSX-T%2FVMware% 2FVMWare%2520NSX-T%2FDocuments% 2Fnsxt_21_admin.pdf&usg=AOvVaw2DqQfqPkhzWQfiJP2SgNbO (213) Reference: https://www.google.com/url?sa=t&rct=j&q=&esrc=s&source=web&cd=7&ved=2ahUKEwjw0duct_nmAhUJ1BoKHVrgACcQFjAGegQIBxAC&url=ftp%3A%2F%2Fftp.inwinstack.com%2FOther%2FAI-NSX-T%2FVMware% 2FVMWare%2520NSX-T%2FDocuments% 2Fnsxt_21_admin.pdf&usg=AOvVaw2DqQfqPkhzWQfiJP2SgNbO (213) - C. SPAN mirrors
- D. Port Mirroring
Answer: A
NEW QUESTION 57
......
Topics of Professional VMware NSX-T Data Center 2V0-41.20 Exam
Candidates should recognise each of the following aims prior to taking this exam. Each objective is described below; the applicant should have experience with and associated documentation along with relevant resources. That includes data relevant to the target. All applicable product information should be familiar to the applicant or have an equivalent skill set.
It is recommended that, where possible, the applicant use these courses and/or other resources to provide background information on the exam objectives. The syllabus for the Professional VMware NSX-T Data Center 2V0-41.20 examination is listed below in detail of each section and their topics:
1. Architectures and Technologies
There are no testable objectives covered by this section.
2. VMware Products and Solutions
Objectives covered by this section:
- Explain the Edge Architecture and Features
- Outline the Solutions of NSX Portfolio
- Describe the VMware Virtual Cloud Network Vision
- Describe the Logical Routing Architecture and Features
- Describe the Logical Switching Architecture and Features
- Describe the NSX-T Data Center Network Services
- Identify the Supported Integration Platforms of NSX-T Data Center (Containers, Public Cloud, Private Cloud, Hybrid Cloud, DevOps tools, 3rd Party etc.)
- Describe NSX-T Data Center Architecture and Component Sub-systems
- Explain the Value Proposition and Features of NSX
- Identify Physical and Virtual Infrastructure Requirements for NSX-T Data Center
- Differentiate the Functionalities of MP, CCP, DP and Consumption Planes
- List the Use-cases for NSX-T Data Center
- Define NSX-T Data Center Terminology
- Explain the NSX-T Data Center Security Architecture and Features
3. Planning and Designing
There are no testable objectives covered by this section.
4. Installing, Configuring, and Setup
Objectives covered by this section:
- Configure Hypervisor Networking (vSphere and KVM) for NSX-T Data Center
- Configure Service Insertion with NSX-T Data Center
- Outline the installation and Preparation Workflow of NSX-T Data Center
- Configure and Manage Logical Switching Features
- Configure NSX-T Data Center Network Services (Layer-3)
- Deploy and Configure NSX-T Data Center Environment
- Configure NSX-T Edge Nodes and Edge Cluster
- Configure NSX-T Data Center Security Features
- Configure and Manage Logical Routing Features
5. Performance-tuning, Optimization, Upgrades
There are no testable objectives covered by this section.
6. Troubleshooting and Repairing
Objectives covered by this section:
- Troubleshoot Common NSX-T Data Center Installation/Configuration Issues
- Compare and Contrast Tools Available for Troubleshooting
- Troubleshoot Common NSX-T Data Center Component Issues
- Troubleshoot Common Connectivity Issues
- Identify the default Log File Locations of NSX-T Data Center Components
- Troubleshoot Common Physical Infrastructure Issues
7. Administrative and Operational Tasks
Objectives covered by this section:
- Configure Roles and Permissions for NSX-T Data Center Environment
- List Operations Tasks in a VMware NSX-T Data Center Environment (syslog, backup/restore etc.)
- Generate Log Bundles
- Monitor a VMware NSX-T Data Center Implementation
2V0-41.20 Deluxe Study Guide with Online Test Engine: https://www.prep4pass.com/2V0-41.20_exam-braindumps.html
2V0-41.20 Test Prep Training Practice Exam Questions Practice Tests: https://drive.google.com/open?id=1mqR51ZSh9aAONZ4nRhHj2pZ8JIaQ8UFh
